Air Impact Wrench 1/2" 1000Nm YT-09528 YATO
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:YT-09528
Availability:
EAN code:5906083049736
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:3,17 kg
By purchasing this product, you will receive 383 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (1)
Air Impact Wrench 1/2" 1000Nm YATO YT-09528
Pneumatic impact wrench with a 1/2-inch drive and a maximum torque of 1000 Nm. A tool designed for professional use in vehicle workshops, tyre fitting centres and industrial plants where a high tightening force is required in a compact size.
Technical features of the impact wrench
1000 Nm torque
Maximum tightening force sufficient for loosening seized wheel nuts on heavy goods vehicles, chassis bolts and fasteners in industrial machinery. A value of 1000 Nm allows work with M20-M24 bolts while maintaining the appropriate tightening torques.
Twin Hammer mechanism
The twin-hammer impact system generates short, high-energy pulses with lower air consumption (120 l/min) compared with single-hammer systems. This design reduces the vibration transmitted to the operator's hand and extends the service life of the mechanism.
Torque control in 5 steps
The control dial allows the tightening force to be adjusted to the requirements of a specific application. This function prevents thread damage in soft materials and allows initial tightening without the risk of exceeding the permissible torque.
Aluminium body
The aluminium alloy housing provides resistance to corrosion and mechanical damage while keeping the tool lightweight. Aluminium dissipates the heat generated during intensive work, preventing the mechanism from overheating.
Technical specification
| Model | YT-09528 |
| Manufacturer | YATO |
| Output drive size | 1/2" (12.7 mm) |
| Maximum torque | 1000 Nm |
| No-load speed | 6000 rpm |
| Air consumption | 120 l/min (at 6.3 bar) |
| Impact mechanism type | Twin Hammer |
| Number of torque settings | 5 + reverse |
| Body material | Aluminium |
| Rotation direction | Forward/Reverse (switch) |
| Recommended working pressure | 6.3 bar (90 psi) |
Applications of the 1/2" air impact wrench
- Wheel changes on cars, vans and heavy goods vehicles at tyre fitting centres
- Removal and fitting of suspension, steering and braking components
- Exhaust system work – loosening rusted bolts and nuts
- Fitting and removal of engine components in vehicle workshops
- Bolting steel structures in industry and construction
- Maintenance and repair of industrial machinery, agricultural and construction equipment
- Assembly work in production plants requiring high tightening torques
- Servicing of commercial vehicles, buses and specialist machinery
Compressed air installation requirements
Compressor and air installation
The wrench requires a compressor with a minimum output of 120 l/min at a pressure of 6.3 bar. A compressor with an output of at least 150-200 l/min is recommended to ensure continuous operation. The installation should be fitted with an air filter/separator, a pressure regulator with a gauge and a mist lubricator that feeds oil to the air tools.
Air hose diameter
An air hose with an internal diameter of at least 10 mm (3/8") and a length not exceeding 10 metres should be used to supply the wrench. Longer hoses or a smaller diameter will cause a pressure drop and reduce the power of the tool. Quick-release couplings must have full flow, without any restrictions.
Maintenance and use
Before starting work, introduce 3-5 drops of pneumatic oil into the air inlet. This should be repeated after every 2-3 hours of intensive work. Regular lubrication prevents corrosion of the impact mechanism and ensures full tool power.
After finishing work, disconnect the wrench from the air supply and remove any accumulated dirt from the housing. Protect the 1/2" output drive from mechanical damage – deformation of the internal square will prevent impact sockets from seating correctly.
Sockets used with an air impact wrench must be of the impact type, marked "impact" or in black. Chrome sockets intended for hand wrenches may crack under impact pulses, creating a hazard for the operator.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: mi...ki,date of purchase 12-04-2026 10:05
Pneumatic Impact Wrench 1/2" Mini 678 Nm YT-09512 YATO