Diamond Blade, Continuous Rim, 180 mm / YT-6014 / YATO
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-6014
Availability:
EAN code:5906083960147
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,41 kg
By purchasing this product, you will receive 29 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
YATO 180 mm YT-6014 Diamond Blade - continuous rim for cutting porcelain stoneware, glazed tiles and ceramics
A continuous rim diamond blade designed for precision cutting of ceramic, stone and glass materials. The unbroken diamond rim eliminates edge chipping when cutting delicate materials.
Features of the 180 mm diamond blade
Continuous rim - clean cutting edges
The unbroken diamond rim delivers smooth, chip-free cutting of ceramic and stone materials. A rim 5.3 mm high and 2.5 mm thick allows the blade to be guided precisely without vibration, which improves the quality of the cut edge.
Wet cutting - extended service life
The blade requires water cooling during use. Wet cutting lowers the working temperature of the diamond rim, extending its life by up to three times compared with dry cutting. It also eliminates the build-up of ceramic dust.
Recommended speed 8,000 rpm
An optimum speed of around 8,000 revolutions per minute ensures efficient cutting without overheating the rim. At this speed a 180 mm blade reaches a linear speed of around 75 m/s, which guarantees efficient removal of material from the cut line.
Compatibility with angle grinders
The 180 mm diameter suits 1,800-2,200 W angle grinders with an M14 spindle thread. Before fitting, check the maximum permitted blade diameter in the tool's instructions and that the mounting bore matches.
Technical specification
| Model | YT-6014 |
| Brand | YATO |
| Outer diameter | 180 mm |
| Rim type | Continuous |
| Rim height | 5.3 mm |
| Rim thickness | 2.5 mm |
| Recommended speed | Around 8,000 rpm |
| Cutting method | Wet (with water cooling) |
| Materials cut | Porcelain stoneware, glazed tiles, ceramics, stone tiles, glass, porcelain |
Applications for the diamond blade on glazed tiles and porcelain stoneware
- Cutting porcelain stoneware tiles up to 12 mm thick
- Trimming glazed wall and floor tiles
- Cutting ceramic mosaic and glass inserts
- Cutting stone tiles such as travertine and marble
- Cutting ceramic paving bricks and clay pavers
- Trimming technical porcelain and sanitaryware
- Cutting out openings for electrical sockets in tiles
- Cutting toughened and laminated glass with adequate cooling
Use and maintenance of the diamond blade
Cooling requirements
The blade requires a constant supply of water to the cutting zone. On bench tile saws, check the water level in the tank before starting work. When using angle grinders, fit a special water-fed guard or dip the blade regularly in a container of water every 20-30 seconds of cutting.
Checking the condition of the rim
Regularly check the remaining height of the diamond rim. Once the rim is worn below 2 mm, cutting performance drops and the risk of damaging the blade body increases. A worn blade should be replaced with a new one.
Matching the speed to the material
With harder materials (technical porcelain stoneware, stone) the feed rate can be increased while keeping the speed constant. When cutting glass and porcelain, use a slower feed rate to avoid thermal cracking of the material.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
