Diamond Blade for Ceramic Materials 300x25.4 mm YT-5983 YATO
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:YT-5983
Availability:
EAN code:5906083959837
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:1,50 kg
By purchasing this product, you will receive 117 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Diamond Blade for Ceramic Materials 300x25.4 mm YT-5983 YATO
Diamond blade designed for cutting ceramic tiles, porcelain, terracotta and natural stone. The diamond segment ensures durability and cutting precision in bench-mounted and hand-held tile cutters.
Diamond blade features
Continuous diamond segment
The cutting edge is coated with synthetic diamonds in a metal matrix. The continuous segment design produces a smooth cut with no chipping of the ceramic material edges, which matters for visible finished surfaces.
300 mm diameter
This parameter determines the maximum cutting depth. A 300 mm blade allows tiles and stone to be cut to a thickness of approximately 100 mm, depending on the design of the tile cutter. It performs well in construction and finishing work.
25.4 mm bore
The bore diameter matches the standard used in tile cutters and table saws. Before buying, check the spindle diameter of your machine – 25.4 mm is 1 inch.
Optimised diamond distribution
An even distribution of the diamond grit in the segment extends the working life of the blade and reduces cutting resistance. This translates into lower energy consumption and less load on the tile cutter motor during intensive work.
Technical specification
| Model | YT-5983 |
| Manufacturer | YATO |
| Blade diameter | 300 mm |
| Bore diameter | 25.4 mm (1 inch) |
| Segment type | Continuous diamond |
| Intended use | Ceramic materials, porcelain, terracotta, natural stone |
| Cutting type | Wet and dry cutting |
Applications of the diamond blade
- Cutting glazed ceramic tiles during finishing work
- Cutting porcelain stoneware of increased hardness and density
- Cutting terracotta in various formats and thicknesses
- Working natural stone – marble, granite, sandstone
- Cutting facing clinker and facing bricks
- Making cut-outs and adjustments when fitting wall and floor coverings
- Renovation and construction work requiring precise cutting of ceramics
- Cutting paving slabs and stone garden materials
Tool compatibility
The blade works with tile cutters, table saws and angle grinders fitted with an adapter for a 300 mm blade. Before fitting, check the maximum permitted blade diameter in the machine's manual and make sure the spindle diameter is 25.4 mm. A different diameter requires reducing rings.
Use and maintenance
Water cooling is recommended during operation – it lowers the cutting temperature, extends the life of the diamond segment and reduces dust. When dry cutting, pause every few dozen seconds so that the blade can cool down.
Even segment wear is achieved by avoiding one-sided loading of the blade and cutting at an angle. The blade must be fitted in the direction of rotation marked by the arrow. The rotational speed should match the tile cutter manufacturer's recommendations – typically 4000-6000 rpm for 300 mm blades.
Once the work is finished, clean the blade of material residue and deposits, especially after wet cutting. Storing it in a dry place prevents corrosion of the steel body.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
