Diamond Chamfering & Grinding Disc M14 125x22.23mm KD11229 KRAFT&DELE
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:KD11229
Availability:
EAN code:5903957004914
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,25 kg
By purchasing this product, you will receive 95 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Diamond Chamfering & Grinding Disc 125x22.23mm M14 — Kraft&Dele KD11229
A diamond disc with a grooved continuous rim, designed for cutting, chamfering and grinding hard ceramic and stone materials with an angle grinder. The M14 mount ensures compatibility with standard 125 mm angle grinders available on the market.
Technical features
Grooved continuous rim
A continuous, grooved diamond segment surrounds the disc without gaps, which ensures consistent cutting and a smooth finish on the material edge. The absence of slots in the rim limits chipping along the cut edge — important when working with porcelain stoneware and porcelain.
1.5 mm thickness
The relatively thin disc reduces the width of the cut (kerf), which limits material waste and reduces the load on the grinder motor. A thinner disc does, however, require precise tool guidance to avoid lateral stress.
M14 mount / 22.23 mm bore
The M14 thread is the standard used on 125 mm angle grinders. Before fitting, make sure the grinder has an M14 threaded spindle or a suitable reducing bush. The 22.23 mm bore complies with EN 13236.
Dry use
The disc is designed for dry use only. Using water or other coolants may damage the diamond segment or detach the rim. During dry use, work breaks are recommended to prevent the disc from overheating.
Technical specification
| Model | KD11229 |
| Brand | Kraft&Dele |
| Outer diameter | 125 mm |
| Bore diameter | 22.23 mm |
| Mounting thread | M14 |
| Disc thickness | 1.5 mm |
| Rim type | Grooved, closed loop (continuous rim) |
| Operation | Dry |
| Application | Cutting, chamfering and grinding of ceramic and stone materials |
Applications
- Cutting and chamfering porcelain stoneware tiles
- Working granite and natural stone
- Cutting marble
- Grinding and levelling ceramic surfaces
- Cutting hard ceramics and porcelain
- Chamfering tile edges before laying
- Minor stonemasonry and renovation work
Use and maintenance
Operating recommendations
The disc is intended for dry use only — do not use with water cooling. Using an angle grinder with variable speed control is recommended, as this allows the speed to be matched to the material being worked and reduces the risk of overheating. Harder materials (granite, porcelain stoneware) require lower speeds and a slower feed rate. Check the condition of the disc before each use — cracks, deformation or a loose segment mean the disc must be taken out of service. Wear personal protective equipment at all times: safety goggles, gloves and a dust mask.
Grinder compatibility
The disc fits 125 mm angle grinders with an M14 spindle. Before buying, check the spindle thread in the grinder's instruction manual. Most 125 mm angle grinders available on the European market have an M14 thread as standard. A reducing bush is required for other threads.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
