Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.52 Euro
catalog number:KD1164
Availability:
EAN code:5901638116345
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:14,50 kg
By purchasing this product, you will receive 736 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
The KD1164 is an electric fuel dispenser designed for transferring diesel and kerosene, powered by a 230V mains supply. It is supplied as a complete, ready-to-connect kit — with dispensing nozzle, hoses and flow meter. The cast iron pump head and the IP54 rating provide resistance to conditions typical of workshop and industrial environments.
The cast iron pump body is resistant to abrasion and mechanical deformation, which matters during prolonged operation with petroleum-based fuels. The internal copper windings are resistant to chemical corrosion.
The integrated FM-120-2 flow meter provides a reading of the current volume dispensed as well as the cumulative total. Useful for accounting for fuel consumption in vehicle fleets or for maintaining stock records.
The IP54 rating means protection against dust (partial) and against water spray from any direction. The unit can operate in typical workshop and garage conditions and outdoors under cover.
The emergency stop switch allows the pump's power supply to be cut immediately without having to reach for the socket. The manual dispensing nozzle allows precise fuel dosing and reduces the risk of spills.
| Model | KD1164 (ACFD40) |
| Application | Diesel, kerosene |
| Power | 375 W |
| Supply voltage | 230 V / 50 Hz |
| Max. flow rate | 40 L/min |
| Max. pressure | 3 bar |
| Body material | Cast iron |
| Manual dispensing nozzle | Yes |
| IP rating | IP54 |
| Weight | 14.5 kg |
| Dimensions (L × W × H) | 41.5 × 35.5 × 32 cm |
| Fuel pump | KD1164 (ACFD40), 40 L/min |
| Dispensing nozzle (fuel gun) | Yes, included |
| Flow meter | FM-120-2 (max. 120 L/min) |
| Delivery hose | 4 m |
| Suction hose | 2 m |
| Instruction manual | In Polish |
The supplied FM-120-2 flow meter has a nominal capacity of 120 L/min, which provides a considerable margin over the pump's output (40 L/min). This choice of components eliminates the risk of overloading the meter and ensures a more accurate reading at lower flow rates.
Before first use, make sure that all hose connections are leak-tight and that the unit is placed on a stable, level surface. The pump is not designed to work with petrol, fuel alcohols or any other media not listed in the specification — using unsuitable liquids may damage the seals and the head.
After finishing work, it is recommended to flush the hoses and the dispensing nozzle with fuel to remove deposits. The cast iron head should be protected from prolonged contact with water and atmospheric moisture — despite the IP54 rating, the unit is not intended for permanent exposure to rain. The condition of the hoses should be checked regularly for cracks and the tightness of the connections.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: ar...er,date of purchase 07-03-2026 09:32
Client: Ba...ki,date of purchase 04-03-2026 19:29
Client: Ma...ko,date of purchase 01-03-2026 14:06