Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-25000
Availability:
EAN code:5906083054266
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,19 kg
By purchasing this product, you will receive 13 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
Mechanical tool for clearing drain pipes, made from galvanised spring steel wire. Designed for removing blockages in waste systems of 40 mm diameter and above.
The reach allows blockages up to 1.5 m from the entry point to be cleared. Sufficient for most domestic installations, including runs from washbasins, kitchen sinks and baths to the soil stack.
The wire thickness provides sufficient rigidity to punch through blockages while retaining the flexibility needed to manoeuvre inside pipes. The 5 mm diameter is suited to pipes of 40 mm and above, typical of internal installations.
The spring wire allows the auger to be rotated during use, which increases the effectiveness of mechanically breaking up the blockage. The sharp tip punches through organic and inorganic build-ups, allowing them to be broken down or pulled out.
The zinc coating protects the wire against corrosion on contact with water and the chemicals present in a drainage system. It extends the service life of the tool under regular use in a damp environment.
| Manufacturer | YATO |
| Model | YT-25000 |
| Auger length | 1.5 m |
| Wire diameter | 5 mm |
| Material | Galvanised spring steel wire |
| Tip type | Sharp tip |
| Handle type | Ergonomic |
| Application | Drain pipes from 40 mm |
The auger is fed into the pipe after removing the trap, or directly through the drain cover. While working, turn the handle clockwise while gently pushing the auger towards the blockage. The rotating motion causes the spring wire to screw into the build-up and break it up mechanically. Once the blockage has been cleared, withdraw the auger while turning it anticlockwise.
After each use, rinse the auger with warm water and detergent to remove organic residue and deposits. Drying the tool with a cloth before putting it away is advisable, as this prevents moisture from accumulating. Periodic lubrication of the handle and rotating parts extends the working life of the tool.
The 5 mm auger is designed for pipes with an internal diameter of 40 mm and above. With smaller diameters there is a risk of the auger becoming stuck, while in larger bores (over 100 mm) effectiveness may be limited because the wire is not rigid enough relative to the working space.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Pi...ki,date of purchase 24-06-2025 18:42
Client: ew...ko,date of purchase 26-02-2025 21:05