Galvanised Mixing Paddle for Mortars and Compounds 100 x 600 mm VOREL 09040
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:09040
Availability:
EAN code:5906083090400
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,32 kg
By purchasing this product, you will receive 45 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Galvanised Mixing Paddle for Mortars and Compounds 100 x 600 mm VOREL 09040
A spiral mixing paddle made from galvanised steel, designed for preparing paints, adhesives, masonry mortars and filler compounds. The galvanised coating provides corrosion resistance when working with materials of alkaline and acidic pH.
Technical features of the mixing paddle
Galvanised steel construction
The zinc coating protects the paddle surface against chemical corrosion on contact with building materials of varying pH. The zinc layer protects the steel against oxidation even during prolonged storage in damp conditions.
100 mm working diameter
The 100 mm diameter represents a compromise between mixing performance and the load on the drill motor. This parameter determines the container diameter - the paddle is well suited to buckets from 10 to 20 litres, ensuring effective circulation of the material.
600 mm working length
The 600 mm length allows mixing in standard builder's buckets without the risk of the drill chuck being submerged in the material. It provides a safe distance between the material and the power tool, which is important when working with cement mortars.
1/2" hex shank
The standard 1/2" (12.7 mm) hex shank fits SDS-plus quick-release chucks and standard drill chucks. The hex system transfers torque without slipping, which prevents damage to the chuck when mixing thick compounds.
Technical specification
| Model | VOREL 09040 |
| Paddle diameter | 100 mm |
| Total length | 600 mm |
| Shank type | 1/2" hex (12.7 mm) |
| Material | Galvanised steel |
| Design type | Single-spiral |
| Manufacturer | VOREL |
Applications of the galvanised mixing paddle
- Mixing emulsion, acrylic and dispersion paints for walls and ceilings
- Preparing adhesives for ceramic tiles, porcelain tiles and natural stone
- Mixing dispersion adhesives for wallpaper and floor coverings
- Homogenising cement-lime masonry mortars
- Preparing gypsum and cement filler compounds
- Mixing ready-mixed plasters and dry plaster mixes
- Preparing deep-penetrating primers and base coats
- Mixing levelling compounds for concrete substrates
Use and maintenance
Choosing operating parameters
A mixing paddle with a 100 mm diameter requires a drill with a minimum power of 800 W. The recommended speed is 400-600 rpm for mortars and adhesives and 300-400 rpm for thick filler compounds. Higher speeds aerate the material and reduce its properties.
Cleaning after use
Clean the paddle immediately after finishing work, before the material sets. Cement mortars are washed off with water and oil-based paints with solvent. Residues of hardened material are removed mechanically with a wire brush. After washing, dry the paddle to prevent corrosion where the zinc coating has been damaged.
Compatibility with power tools
The 1/2" hex shank fits hammer and non-hammer drills with a keyless chuck, as well as paddle mixers. Before fitting, check that the drill chuck accepts hex shanks - some models require an SDS-plus to hex adaptor.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
