GEKO PREMIUM 125x6 Inox Metal Grinding Disc (5 25 100) G78218
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:G78218
Availability:
EAN code:5901477100086
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,17 kg
By purchasing this product, you will receive 37 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
GEKO PREMIUM 125x6 Inox Metal Grinding Disc G78218
Corundum grinding disc designed for working stainless steel and other metals. The fibreglass-reinforced construction ensures stable operation when grinding both flat surfaces and edges.
Technical characteristics
Aluminium oxide abrasive
Aluminium oxide grains are hard-wearing and resistant to crumbling. The material effectively removes metal stock when grinding carbon steel, stainless steel and iron alloys, staying sharp for longer.
Reinforced resin bond
Synthetic resin bonds the abrasive grains and gives the disc flexibility during use. Fibreglass reinforcement increases mechanical strength and protects against cracking under side loads.
6 mm thickness
6 mm discs are used for surface grinding and edge bevelling. The larger working surface compared with cutting discs provides stability when removing rust and welds and when levelling surfaces.
Peripheral speed of 80 m/s
The maximum permitted linear speed defines safe operating parameters. At a diameter of 125 mm this corresponds to a maximum of 12,200 rpm — check this value in the grinder's specification before fitting.
Technical specification
| Model | G78218 |
| Series | GEKO Premium |
| Abrasive grain type | Aluminium oxide (electrocorundum) |
| Bond type | Resin, fibreglass-reinforced |
| Outer diameter | 125 mm |
| Disc thickness | 6.0 mm |
| Bore diameter | 22.23 mm |
| Maximum speed | 12,200 rpm |
| Permitted peripheral speed | 80 m/s |
| Intended use | Metal grinding, stainless steel (Inox) |
Applications
- Surface grinding of stainless and carbon steel
- Removing rust and paint coatings from metal surfaces
- Levelling weld seams and removing burrs
- Bevelling the edges of steel sheets and sections
- Preparing surfaces before painting or welding
- Removing unevenness and machining marks
- Grinding steel structures and steel components
- Surface finishing in mechanical and metalworking workshops
Use and maintenance
Checking compatibility
Before fitting, make sure the angle grinder accepts 125 mm discs and has a 22.23 mm (M14) spindle. The tool's maximum speed must not exceed 12,200 rpm — this figure is usually shown on the tool's rating plate.
Safety during use
The disc must be fitted with the correct washers and tightened in accordance with the grinder's instructions. Before starting, check that the disc has no cracks or damage. Personal protective equipment is mandatory: safety goggles, work gloves and hearing protection.
Storage
Discs should be stored in a dry place, away from sources of moisture. Avoid mechanical impacts and store flat or suspended to prevent deformation. Moisture can weaken the resin bond and reduce the strength of the disc.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
