Half-Round Wood Carving Disc 30mm, M14
Key information
Availability:Dostępny u producenta — wysyłka w 3 dni
Shipping time:3 days
Shipping cost:From 3.28 Euro
catalog number:YT-61768
Availability:
EAN code:5906083122552
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,11 kg
By purchasing this product, you will receive 47 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Half-Round Wood Carving Disc 30mm, M14 YATO YT-61768
The half-round carving disc is an abrasive attachment mounted on angle grinders, designed for rapid removal, shaping and smoothing of wooden surfaces. The 30mm diameter model with M14 thread allows both flat and rounded components to be worked.
Technical features of the half-round carving disc
HRC 40-50 carbon steel
A material with a hardness of 40-50 HRC provides adequate resistance to abrasion during intensive work with wood. This hardness allows the abrasive grains to stay sharp while retaining the flexibility that prevents cracking.
30mm working diameter
The diameter of the carving disc determines the width of the strip being worked and the depth of the recess when working concave surfaces. The 30mm dimension is a compromise between the manoeuvrability of the tool and the rate of material removal.
Standard M14 thread
The M14 thread is a universal fitting used on angle grinders rated at 600-2400 W. Compatibility should be checked in the grinder's specification – some models require an adapter or have an M10 thread.
Half-round shape
The dome profile allows both flat surfaces (when working with the edge) and concave surfaces (with the full face) to be worked. This shape also makes it easier to work in recesses and on rounded structural components.
Technical specification
| Model | YT-61768 |
| Manufacturer | YATO |
| Disc diameter | 30 mm |
| Mounting thread | M14 |
| Material | Carbon steel |
| Steel hardness | HRC 40-50 |
| Surface finish | Hardened, lacquered |
| Maximum rotational speed | 12,500 rpm |
| Workpiece material | Wood |
| Tool type | Half-round carving disc |
Applications of the wood carving disc
- Stripping layers of varnish, paint or old finish from wooden surfaces
- Shaping joinery components – creating profiles, radii and concave forms
- Smoothing unevenness after cutting or milling wood
- Pre-treating surfaces before sanding with abrasive paper
- Removing burrs and sharp edges from structural components
- Wood carving – creating concave forms and textures
- Preparing wooden surfaces for gluing or lacquering
- Furniture restoration – removing damaged surface layers
Use and maintenance
Fitting the carving disc
Before fitting, disconnect the grinder from the mains. Screw the carving disc onto the grinder spindle in the direction of rotation (usually clockwise). Tighten by hand, then secure with a spanner. Check that the mounting is secure before starting.
Operating parameters
The maximum speed of 12,500 rpm must not be exceeded – a higher rotational speed may cause the tool to break up. Check the grinder's specifications before use. Guide the tool evenly while working, without excessive pressure, which can lead to overheating and premature wear.
Personal protective equipment
Mandatory: safety goggles (protection against flying wood chips), work gloves, FFP2-class dust mask (harder woods generate fine dust). Recommended: ear defenders for prolonged work, clothing that fits close to the body with no loose parts.
Cleaning and storage
After finishing work, clean wood residue off the carving disc with compressed air or a brush. The lacquered surface protects against corrosion, but storage in a dry place is recommended. Check the condition of the abrasive grains regularly – a worn carving disc generates more heat and reduces the quality of the finish.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Convex Wood Carving Disc with Saw Teeth 125mm No.1 YT-59174 YATO
Convex Wood Carving Disc with Saw Teeth 115mm No.1 YT-59173 YATO