Hydraulic Body Repair Kit 20T GEKO G02147
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 37.38 Euro
catalog number:G02147
Availability:
EAN code:5901477152764
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:35,00 kg
By purchasing this product, you will receive 1767 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (6)
Hydraulic Body Repair Kit 20T GEKO G02147
Professional 20-tonne hydraulic body repair kit for workshop tasks requiring precise spreading, lifting, straightening and bending of components. A complete kit with hydraulic pump, interchangeable extensions and three types of working foot.
Technical features
20-tonne working force
This parameter defines the maximum pushing force the hydraulic ram can generate. A value of 20 tonnes (196 kN) makes it possible to spread structural components, straighten frames and pull bearings and bushes under workshop conditions. Actual force depends on the pressure in the hydraulic system and the diameter of the piston.
Working range 330-460 mm
The minimum and maximum distance over which the kit's components can be set apart. 330 mm is the starting position with the ram retracted; 460 mm is the maximum spread with the piston fully extended. The 130 mm difference is the working stroke of the ram. Interchangeable extensions increase this range by a further 10-50 cm.
Fast-action hydraulic pump
The mechanism that pumps hydraulic oil into the ram. Fast-action means the pump uses a two-stage system: it initially advances the piston quickly at low resistance and, once resistance is met, switches to high-pressure mode with a slower advance and greater force. This shortens working time while retaining the full working force.
Interchangeable extension and foot system
The kit contains four extensions (10, 20, 30 and 50 cm) that can be joined together, plus three types of foot: flat (for flat surfaces), conical (for precise positioning in openings) and cross (for a stable purchase on uneven surfaces). The connectors allow configurations to be assembled to suit the job in hand.
Technical specification
| Model | G02147 |
| Spreading force | 20 T (196 kN) |
| Working range | 330 - 460 mm |
| Ram stroke | 130 mm |
| Pump type | Hydraulic, fast-action |
| Hydraulic hose | High-pressure, flexible, with protective springs |
| Extensions supplied | 10 cm (5"), 20 cm (8"), 30 cm (12"), 50 cm (20") |
| Number of connectors | 3 pcs |
| Working feet | Cross, conical, flat |
| Carry case | Metal, 71 x 30 x 15 cm |
Applications
- Straightening frames and load-bearing components in body repair and paint shops
- Spreading structural components during accident repairs
- Pulling bearings, bushes and press-fitted components from shafts and bores
- Lifting heavy assemblies in confined spaces
- Bending metal sections and pipes under workshop conditions
- Fitting and removing components that require controlled force
- Maintenance work on industrial machinery
- Repairs to agricultural and construction equipment
Use and maintenance
Checking compatibility
Before starting work, measure the distance between the points of support and assess the force required. If the distance exceeds 460 mm, extensions must be used. The maximum force of 20 tonnes is sufficient for most workshop tasks, but it must not be used for jobs requiring forces above 196 kN. Always check that the support is stable and use the appropriate feet.
Hydraulic system maintenance
Check the hydraulic oil level in the pump and the condition of the high-pressure hose at regular intervals. The protective springs on the hose ends guard against damage when bending, but sharp bends below a radius of 10 cm should be avoided. After work, release the pressure with the release valve and clean dirt from the ram. Store the kit in the metal case, protected from moisture and dust.
Fitting the extensions
The extensions can be joined to one another with the supplied connectors, giving a greater reach. When joining them, tighten the connections by hand, avoiding over-tightening, which can make subsequent dismantling difficult. Before starting the pump, make sure all connections are secure and that there is no play in the assembly.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Ma...ak,date of purchase 27-04-2026 11:10
Client: Dz...ji,date of purchase 23-02-2026 14:56
Client: Ka...ki,date of purchase 07-08-2025 15:10
Client: An...ik,date of purchase 27-11-2024 10:54
Client: Re...or,date of purchase 28-12-2022 10:15
Client: JU...UK,date of purchase 28-06-2022 13:16
