Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 7.99 Euro
catalog number:8KW
Availability:
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:23,00 kg
By purchasing this product, you will receive 8756 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
A single-phase grid-tied inverter designed for photovoltaic installations of up to 8 kW. The unit is fitted with two independent MPPT inputs, full AC/DC surge protection and extensive remote communication options, making it a suitable solution for both domestic installations and small commercial premises.
Two independent maximum power point trackers allow strings of panels with different orientations or tilt angles to be connected. Each string is optimised separately, which reduces losses caused by partial shading or mismatched module parameters.
Integrated lightning protection on both the direct current and alternating current sides removes the need to install external surge protection devices as separate components. The IP65 rating means the unit is fully dust-tight and resistant to water jets, so it can be installed outdoors without an additional enclosure.
The built-in current-voltage (I&V) curve analysis function allows faulty or underperforming photovoltaic panels to be detected and located remotely. This shortens installation maintenance times, with no need to physically check each module individually.
All electronic components used are of industrial grade, which translates into the 25-year full lifecycle declared by the manufacturer. This figure matters when planning the return on investment and maintenance schedules for PV installations.
| Model | KEHUA SPI8K-B |
| Rated AC output power | 8 kW |
| Maximum output power | 8.8 kW |
| Rated AC output current | 11.6 A |
| Number of MPPT inputs | 2 (independent) |
| Ingress protection rating | IP65 |
| Surge protection | Integrated AC/DC (lightning protection) |
| Current total harmonic distortion (THDi) | <3% |
| LVRT function | Yes (Low Voltage Ride Through) |
| Communication interfaces | RS485, Wi-Fi, GPRS |
| Software updates | Remote (OTA) |
| Diagnostics | I&V Curve Scan |
| Declared lifecycle | 25 years |
| Intended use | Outdoor |
The inverter supports three communication protocols at the same time: RS485 (wired, for local monitoring systems and meters), Wi-Fi (wireless access to the manufacturer's app) and GPRS (data transmission over the mobile network in locations without Wi-Fi access). Remote software updates (OTA) remove the need for a service visit when deploying firmware patches.
Low Voltage Ride Through (LVRT) is a function that allows the inverter to keep operating during temporary voltage dips on the distribution network, instead of disconnecting immediately. It is required by network operators in many European countries — its presence is a condition for obtaining a grid connection for installations above a certain capacity. Before purchasing, the current requirements of the local distribution network operator (DNO) should be verified.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.