KD10300 Gas Blow Torch with Soldering Tip KRAFT&DELE
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:KD10300
Availability:
EAN code:5903175330949
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,98 kg
By purchasing this product, you will receive 114 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
KD10300 Gas Blow Torch with Soldering Tip
The Kraft&Dele KD10300 gas blow torch runs on propane-butane and is supplied with a copper soldering tip and a 17 mm pinpoint nozzle. It is designed for soldering, burning off coatings and defrosting, both in the workshop and at home.
Key features
Flame temperature range
The torch reaches flame temperatures of 1250–1850 °C. The lower end of the range is enough for defrosting pipes and burning off paint, while the higher end allows brazing of copper and brass in plumbing and refrigeration systems.
Reinforced hose with crimped end fittings
The 150 cm hose is fitted with crimped, threaded end fittings at both ends. Mechanical crimping removes the risk of the connection leaking under working gas pressure, which directly improves safety in use.
17 mm pinpoint nozzle
The 17 mm nozzle focuses the flame onto a small area. This lets you direct the heat precisely without unnecessarily heating adjacent components — important when soldering in tight spaces.
Interchangeable nozzles
The torch accepts other working nozzles (not included in the kit), which extends its range of applications to jobs requiring a wider or flat flame, such as removing heat-shrink tubing or heating larger surfaces.
Technical specification
| Brand | Kraft&Dele |
| Model | KD10300 |
| Product type | Gas blow torch with soldering tip |
| Gas type | Propane-butane (from a cylinder) |
| Power | 4.5 kW |
| Flame temperature | 1250–1850 °C |
| Nozzle size | ø 17 mm |
| Gas consumption | 140 g/h |
| Hose length | 150 cm |
| Tip weight | 200 g |
| Total weight | 0.86 kg |
Kit contents
KD10300 gas blow torch, 1.5 m reinforced hose, 200 g soldering tip, 17 mm pinpoint nozzle, 2 spanners for the torch.
Applications
- Brazing copper pipes in water and refrigeration systems
- Soft soldering electrical and electronic joints
- Burning off old paint and lacquer coatings from wood or metal
- Defrosting frozen water pipes and locks
- Heating bolts and nuts before removal
- Removing self-adhesive films and gaskets with heat
- Roofing work when sealing with torch-on roofing felt (with the appropriate nozzle)
Use and maintenance
The torch is connected to a propane-butane cylinder by means of the reinforced hose supplied. Before first use, check all connections for leaks using the spanners provided. The flame intensity is adjusted with the valve on the torch. After use, close the cylinder valve first and only then the torch valve — this purges the gas left in the hose and prevents the hose from perishing under pressure.
After use, clean the copper soldering tip of flux residue and oxidised copper with fine-grade abrasive paper or a file. Store the reinforced hose without kinks and away from heat sources and chemicals that can degrade the rubber.
Cylinder compatibility
The KD10300 torch works with standard propane-butane cylinders available in Poland (e.g. 3 kg, 5 kg, 11 kg). Before purchase, make sure that the cylinder regulator or valve has a thread matching the hose connection. If they do not match, a suitable adaptor is required.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
