KRAFT&DELE KD1882 MIG/MMA/TIG IGBT Welder – Gas & Gasless
Informații esențiale
Disponibilitate:Întrebați despre disponibilitate
Cost de expediere:Din 3.52 Euro
număr de catalog:KD1882
Disponibilitate:
Cod EAN:5903957009810
Stare produs:New, originally packaged
Garanție:24 months of consumer protection
Balanta:8,00 kg
Prin achiziționarea acestui produs, veți primi 670 puncte de la noi, pe care le puteți folosi pentru cumpărături în magazinul nostru. Acest lucru se aplică numai clienților înregistrați în magazinul nostru.
- Descriere produs
- Recenzii de produse (0)
- Istoricul cumparaturilor (1)
Kraft&Dele KD1882 MIG/MMA/TIG IGBT Welder
A multifunction inverter welder with IGBT technology, supporting three welding processes: MIG (with gas and gasless), MMA and TIG LIFT. The welding current range is 15 to 250 A depending on the process, which allows work on both thin sheet metal and thicker structural components. The machine runs on a single-phase 230 V mains supply.
Key features
IGBT technology
Insulated Gate Bipolar Transistors (IGBTs) deliver a stable welding arc with lower power consumption compared with transformer-based power sources. This means the machine heats up less during operation and can be used continuously for longer.
Three welding processes in one machine
The ability to switch between MIG, MMA and TIG LIFT removes the need for separate welders for different materials and thicknesses. One machine handles coated electrodes, welding wire and a tungsten electrode.
Gas and gasless welding (MIG/FLUX)
In MIG mode the machine works with both solid wire under shielding gas (CO2, argon mixtures) and flux-cored wire (FLUX), which does not require a gas cylinder. FLUX mode is practical in field conditions or when welding outdoors.
Stepless current and wire feed speed adjustment
Welding current is adjusted steplessly across the entire working range. Wire feed speed can be set between 2 and 13 m/min, allowing the parameters to be matched to the material thickness and the chosen welding process.
Welding processes — description and applications
MIG (Metal Inert Gas / Metal Active Gas)
A semi-automatic process in which the electric arc burns between a consumable electrode wire and the workpiece. The wire is fed automatically at a speed set by the operator. The KD1882 welder handles wires of 0.8 / 0.9 / 1.0 and 1.2 mm diameter. MIG is a productive and relatively easy process to master — it is suitable for welding carbon steel, alloy steel and stainless steel.
MMA (Manual Metal Arc) — stick welding
The classic arc process using a coated electrode. During welding, the electrode coating forms a layer of slag and shielding gases that protect the weld from oxidation. The welder handles electrodes from 1.6 to 5.0 mm in diameter. The 20–250 A current range allows work with both thin electrodes (for thin sheet) and thick ones (for structural components). MMA is resistant to wind and requires no additional shielding gas.
TIG LIFT (Tungsten Inert Gas — lift start)
Welding with a tungsten electrode under an inert shielding gas (argon). The LIFT arc-starting method involves briefly touching the electrode to the workpiece and lifting it away — without HF spark ignition. TIG produces narrow, precise welds with high metallurgical purity. Current range 15–250 A. Suitable for stainless and alloy steel; it is not suitable for welding aluminium without additional equipment (AC inverter).
Note on welding aluminium
In TIG mode the KD1882 welder operates in DC (direct current) only. TIG welding of aluminium requires alternating current (AC) — the machine is not intended for this application. MIG welding of aluminium requires a wire feeder with a push-pull mechanism or a special torch.
Technical specifications
| Brand / Model | Kraft&Dele / KD1882 |
| Supply voltage | 230 V / 50 Hz |
| Input capacity | 6.3 kVA |
| Open circuit voltage | 62 V |
| Duty cycle | 60% |
| MIG current range | 40–250 A |
| MMA current range | 20–250 A |
| TIG current range | 15–250 A |
| MIG wire diameter | 0.8 / 0.9 / 1.0 / 1.2 mm |
| MMA electrode diameter | 1.6–5.0 mm |
| Wire feed speed | 2–13 m/min |
| Insulation class | H (max. 180°C) |
| Protection rating | IP21S |
| Weight | approx. 8 kg |
What does a 60% duty cycle mean?
The duty cycle specifies the percentage of a 10-minute period for which the machine can operate continuously at maximum current. At a 60% duty cycle the welder runs for 6 minutes and then needs 4 minutes to cool down. At lower current values the duty cycle is proportionally longer.
What does the IP21S protection rating mean?
IP21S means protection against access to the interior of the enclosure with fingers (digit 2) and protection against vertically falling water drops when the machine is stationary (digit 1, letter S). The welder is not designed for use in rain or in direct contact with water.
Typical applications
- Welding carbon steel and alloy steel structures
- Welding stainless steel components (MIG, TIG)
- Car body and vehicle panel repairs (MIG, thin 0.8 mm wire)
- Welding copper and non-ferrous metal installations
- Workshop and service work on agricultural machinery
- Welding fences, gates and metalwork
- Small building and renovation jobs requiring welding
- Welding in hard-to-reach places thanks to the compact design
Package contents
- KD1882 IGBT welder
- Operating manual in Polish
Informații comerciale
Nimeni nu a scris încă o recenzie pentru acest produs. Fii primul care scrie o recenzie.
Scrieți o recenzie pentru acest produs și veți primi de la noi 100 puncte pe care le puteți folosi pentru cumpărături în magazinul nostru. Acest lucru se aplică numai clienților autentificați și înregistrați în magazinul nostru.
Doar clienții înregistrați pot scrie recenzii despre produse. Dacă aveți un cont în magazinul nostru, conectați-vă la el, dacă nu, creați un cont gratuit și scrieți o recenzie.
Client: Ad...ch,data cumpararii 25-06-2026 16:41
YATO YT-81355 MMA Inverter Welder 140A IGBT with Hot Start and Anti Stick