Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:YT-81823
Availability:
EAN code:5906083059612
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,38 kg
By purchasing this product, you will receive 63 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
A slim LED floodlight fitted with SMD LEDs, rated at 20W with a light output of 1800 lumens. The aluminium construction carries an IP65 ingress protection rating, guarding against dust and water jets and allowing outdoor installation in all weather conditions.
At 20W, the floodlight produces 1800 lumens, giving an efficacy of 90 lm/W. This figure describes the actual amount of light emitted by the source and determines how bright the illuminated area will be – 1800 lm is enough to light an area of approximately 18-25 m² under standard outdoor lighting requirements.
An IP65 rating means complete protection against dust ingress (first digit 6) and protection against water jets at a rate of 12.5 l/min from any direction (second digit 5). The floodlight can be mounted on the outside of buildings without risk of damage from rain, snow or dust.
A colour temperature of 6500K corresponds to cool white light with a tone close to daylight. This colour increases contrast and improves the visibility of detail, which is why it is used in security, car park and industrial lighting.
The stated 30,000-hour lifespan equates to around 10 years of operation at an average of 8 hours per day. In practice, this figure defines the point at which light output falls to 70% of its initial value (L70), the standard benchmark for LED light sources.
| Model | YT-81823 |
| EAN code | 5906083059612 |
| Light source | SMD LED (28 LEDs) |
| Power | 20W |
| Light output | 1800 lm |
| Luminous efficacy | 90 lm/W |
| Light colour | 6500K (cool white) |
| Supply voltage | 220-240V AC, 50/60Hz |
| Ingress protection rating | IP65 |
| LED lifespan | 30,000 h |
| Housing | Aluminium |
| Lens | Glass |
| Housing colour | Black |
| Design type | Slim |
| Power cable length | 0.2 m (20 cm) |
| Motion sensor | No |
The YATO YT-81823 LED floodlight must be connected to the 230V mains by a qualified electrician. The 20 cm power cable should be connected to the electrical installation using connectors or a terminal block inside a junction box with a suitable IP rating.
The floodlight should be mounted on a stable surface using the mounting bracket. The bracket allows the tilt angle to be adjusted so that the beam can be directed onto the required area. For outdoor installation, check that the power cable is run through protective conduit or a cable duct to guard against mechanical damage.
The LEDs do not need to be replaced during operation. Periodic cleaning of the glass lens to remove dust and dirt using water with a little glass cleaner will maintain full light output. Disconnect the power supply before cleaning. The floodlight contains no user-serviceable parts.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.