Availability:Chwilowo niedostępny — zapytaj o termin
Shipping cost:From 3.29 Euro
catalog number:G73051
Availability:
EAN code:5901477124518
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,29 kg
By purchasing this product, you will receive 50 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
A metal impulse sprinkler with an adjustable spray range from 30° to a full 360°. The steel construction ensures durability and stability during operation, while the impulse mechanism distributes water evenly over a large area.
The metal construction increases mechanical strength and resistance to damage. The steel body does not deform under water pressure or in adverse weather conditions, which translates into a longer service life.
Two adjustment rings allow the watering sector to be set precisely. The range can be limited to a chosen section of the circle (e.g. 90° or 180°), making it possible to water irregular areas without wasting water.
Changing the spray pattern from a concentrated jet to a fine mist lets you match the watering method to the type of plants. A focused jet reaches further, while a fine mist waters sensitive plants more gently.
The impulse mechanism delivers water in regular pulses, which ensures even soil moisture and better water penetration deep into the ground. The design runs quietly compared with other types of rotary sprinkler.
| Model | G73051 |
| Sprinkler type | Impulse |
| Head material | Steel |
| Maximum spray diameter | 24 m (depending on water pressure) |
| Spray angle adjustment range | 30° - 360° |
| Angle adjustment type | Twin-ring |
| Jet adjustment | Yes (from jet to mist) |
| Connection type | Universal, with quick-connect adaptor |
| Manufacturer | GEKO |
The actual spray diameter depends on the water pressure in the system. At a pressure of 2-3 bar the sprinkler achieves its maximum reach of 24 m. Lower pressure (below 2 bar) may reduce the reach to 15-18 m. To check the pressure in the mains, use a pressure gauge connected to an outdoor tap.
Before first use, flush the hose with water to remove any debris that could block the impulse mechanism. The quick-connect adaptor allows fast fitting without tools – simply push the hose connector into the adaptor until it clicks.
The spray angle is adjusted using the two rings on the body. The first ring sets the start of the spray sector and the second sets its end. For a full circle (360°), set both rings to the same position.
At the end of the season, disconnect the sprinkler, drain it of water and store it in a dry place. The steel head needs to be checked periodically for corrosion – any signs of rust can be removed with a wire brush and treated with anti-corrosion spray.
If the sprinkler does not rotate smoothly, check the water pressure (the minimum is around 1.5 bar) and make sure the mechanism is not blocked by sand or sediment. Uneven spraying may be caused by incorrect adjustment of the setting rings – reset the settings to the 360° position and set the required range again.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Ma...cz,date of purchase 28-05-2026 21:18
Client: Pi...ek,date of purchase 07-05-2026 11:23
Client: To...ki,date of purchase 31-01-2026 10:48
Client: Ro...ki,date of purchase 25-05-2025 12:01
Client: Ry...er,date of purchase 28-04-2020 12:16