Metal Rotary Burr 15 mm HEX
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-61750
Availability:
EAN code:5906083108464
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,05 kg
By purchasing this product, you will receive 9 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
YATO YT-61750 15 mm HEX Metal Rotary Burr
Rotary burr made from #45 carbon steel with an oxidised finish, designed for working steel and aluminium. The 1/4" HEX shank makes it compatible with most drill drivers and die grinders.
Technical Features of the Rotary Burr
#45 Carbon Steel with Oxidised Finish
The material has a carbon content of 0.42-0.50%, giving a hardness of 170-217 HB. The oxidised finish forms a protective layer that reduces friction and delays surface corrosion when working with metals.
15 mm Cutting Diameter
The 15 mm diameter is the ideal size for milling grooves, deburring edges and chamfering holes in metal components. It removes material at a rate that allows efficient work without overloading the tool's motor.
1/4" HEX Shank
The 6.3 mm (1/4") hexagonal shank fits standard quick-change chucks on drill drivers and die grinders. The hex geometry stops the tool from spinning in the chuck under load, which improves both safety and precision.
Maximum Speed 11,000 rpm
This figure sets the upper speed limit at which the burr remains stable and safe to use. Exceeding this limit can overheat the material and damage the cutting head. For steel, 3,000-6,000 rpm is recommended; for aluminium, 6,000-9,000 rpm.
Technical Specification
| Model | YT-61750 |
| Cutting head material | Carbon steel #45 |
| Surface finish | Oxidised |
| Burr diameter | 15 mm |
| Overall length | 65 mm |
| Shank type | Hexagonal (HEX) |
| Shank size | 1/4" (6.3 mm) |
| Maximum speed | 11,000 rpm |
| Materials | Steel, aluminium |
Applications of the Rotary Burr
- Deburring edges after cutting steel sheet and profiles
- Chamfering holes in structural components
- Removing excess weld metal and smoothing weld seams
- Milling guide slots in aluminium housings
- Shaping and fitting components in mechanical workshops
- Preparing surfaces for welding or painting
- Machining prototypes and one-off parts in single-piece production
- Metal model making that requires precise material removal
Use and Maintenance
Checking Tool Compatibility
Before fitting, check that the power tool has a 1/4" quick-change chuck or an adapter that accepts hex shanks. The tool must offer variable speed control up to a maximum of 11,000 rpm. Impact drivers are not recommended, as their vibration damages the cutting head.
Operating Parameters for Different Materials
Structural steel: 3,000-6,000 rpm, feed rate 20-40 mm/min, cooling with a coolant emulsion or cutting oil. Aluminium: 6,000-9,000 rpm, feed rate 40-80 mm/min, cooling with compressed air or dry. Speeds that are too high scorch the material; speeds that are too low tear the edges.
Maintenance After Use
Once you have finished, remove swarf with compressed air or a brush and clean any residue of the workpiece material from the surface. Store the burr in a dry place, protected from moisture that causes corrosion. Checking the condition of the cutting head regularly allows wear to be spotted early, so the burr can be replaced before cutting precision is lost.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
