Pipe Fusion Welder 1500W D20 mm–D32 mm KD3041 KRAFT&DELE
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:KD3041
Availability:
EAN code:5903957004259
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:1,33 kg
By purchasing this product, you will receive 147 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Kraft&Dele KD3041 Socket Fusion Pipe Welder — 1500W, D20–D32 mm
The KD3041 is an electric socket fusion welder designed for joining thermoplastic pipes and fittings — polypropylene (PP), polyethylene (PE) and PVC. The machine simultaneously heats the outside surface of the pipe and the inside surface of the fitting, producing a durable, homogeneous joint without the use of adhesives or seals.
Key features
PTFE-coated heating dies
All heating dies are coated with PTFE (Teflon), which prevents molten plastic from sticking to the die surface. This means cleaner joints and easier removal of components after heating, with no risk of deformation.
Single-dial temperature control
The heater temperature is set steplessly with a single dial. Straightforward operation shortens the time needed to set the machine up on site and reduces the risk of entering the wrong parameters.
Simultaneous heating of both surfaces
The heating dies heat the outside surface of the pipe and the inside surface of the fitting at the same time. Both joint surfaces therefore reach the correct welding temperature simultaneously, which is a prerequisite for a leak-tight and strong joint.
Compact build and carrying case
The machine weighs approximately 3 kg. A case for storage and transport is included, allowing the welder and its full set of dies to be moved safely between sites.
Technical specification
| Model | KD3041 |
| Brand | Kraft&Dele |
| Product type | Socket fusion pipe welder |
| Power | 1500 W |
| Power supply | 230 V / 50 Hz |
| Max. welding temperature | 300°C |
| Heat-up time (0–300°C) | under 20 minutes |
| Heating die diameters | 20 mm, 25 mm, 32 mm |
| Die coating | PTFE (Teflon) |
| Weight | approx. 3 kg |
Applications
The KD3041 welder is designed for making socket fusion joints between thermoplastic pipes and fittings in the 20–32 mm diameter range. Typical applications include:
- Domestic cold and hot water systems (PP-R, PE)
- Central heating systems in polypropylene pipe
- Connections to valves, tees and plastic fittings
- Water-based underfloor heating systems
- Service connections and branches in pipeline systems
- Refurbishment and repair of existing PP and PE systems
- Plumbing work in residential and industrial construction
Choosing the right die size
Before starting work, select the die that matches the nominal outside diameter of the pipe. The KD3041 takes pipes of 20, 25 and 32 mm — the sizes most commonly used in domestic and small utility installations. Pipes of other diameters require a welder with the appropriate set of dies.
Operation and maintenance
Before first use, read the instruction manual supplied. Connect the machine to a 230 V / 50 Hz mains supply and set the required temperature with the control dial. The heat-up time to working temperature is under 20 minutes. Once welding temperature is reached, push the pipe and the fitting onto the relevant dies at the same time, wait for the heating time recommended for the diameter concerned, then join the components quickly.
After use, clean any plastic residue off the dies once they have cooled — the PTFE coating makes contamination easier to remove. Store the machine in the case supplied, away from moisture and corrosive substances.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
YATO YT-824480 Cordless Plastic Welding Stapler 3.7V in Case