Pneumatic Die Shear 81070 Vorel
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:81070
Availability:
EAN code:5906083046735
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,97 kg
By purchasing this product, you will receive 127 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (2)
Pneumatic Die Shear 81070 VOREL
Pneumatic die shear for the precise cutting of steel sheet using a punch that travels within a die. The tool is designed for cutting complex shapes without deforming the material edge, and is used in automotive and sheet metal workshops.
Technical characteristics of the pneumatic die shear
Die cutting system
The punch travelling within the die eliminates bending of the material edge during cutting. This design makes it possible to produce precise cut-outs with complex contours while keeping the sheet flat around the cut line.
Compact aluminium construction
The aluminium body combines a weight of 0.8 kg with mechanical strength. Its compact dimensions allow work in confined spaces, typical of vehicle body interiors and hard-to-reach structural joints.
Performance parameters
A frequency of 3500 cuts per minute at a cutting width of 5.5 mm ensures that long cuts are made quickly. An air consumption of 113 l/min allows the tool to be used with workshop compressors of average output.
Ease of use
The pneumatic drive generates the cutting force without the operator having to apply pressure. The tool simply has to be guided along the intended cut line, which reduces fatigue during prolonged work.
Technical specification
| Model | 81070 |
| EAN code | 5906083046735 |
| Working pressure | 0.62 MPa (6.2 bar) |
| Air consumption | 113 l/min |
| Cutting speed | 3500 cuts/min |
| Maximum steel cutting thickness | 1.5 mm |
| Cutting width | 5.5 mm |
| Body material | Aluminium |
| Weight | 0.8 kg |
| Supplied with | Air connector |
Applications of the die shear
- Cutting access holes in body panels during accident repairs
- Removing corroded sections of sills, wheel arches and floor panels
- Preparing edges for welding when replacing structural components
- Cutting steel sheet in the production of ventilation and air conditioning components
- Making cut-outs in equipment panels and metal enclosures
- Dismantling welded sheet metal structures that require precise separation
- Creating templates and prototype parts from steel sheet
- Modifying finished sheet metal components without the risk of deformation
Pneumatic system requirements
Compressor requirements
The tool requires a compressor with a minimum output of 113 l/min at a working pressure of 0.62 MPa (6.2 bar). Piston or screw compressors with a real output of at least 150 l/min are recommended, allowing for pressure drops in the system. The length of the air hose should not exceed 10 metres with a minimum internal diameter of 8 mm.
Air preparation
An air preparation unit consisting of a filter, pressure regulator and mist lubricator should be installed before the tool connector. The filter removes moisture and contaminants that could damage the shear mechanism. The lubricator provides continuous lubrication of the moving parts with pneumatic oil of SAE 10 viscosity.
Use and maintenance
Before starting work, check the condition of the punch blade and the die housing. Worn or damaged cutting components increase the cutting width and reduce the quality of the edge. The blade must be replaced once it has become visibly blunt or if nicks appear.
During cutting, guide the tool with a steady motion along the marked line, avoiding sudden changes of direction. Excessive tilting of the shear relative to the plane of the sheet may cause the punch to jam or the die housing to crack.
After finishing work, blow the pneumatic system through with a short burst of air and introduce a few drops of pneumatic oil through the air inlet. Storing the tool at temperatures above 0°C prevents moisture from condensing in the mechanism.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Ma...ki,date of purchase 23-04-2021 21:40
Client: bo...ka,date of purchase 01-10-2019 09:39
