Portable Spot Air Conditioner 5500 W Monobloc R290 YT-99452 YATO
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 39.73 Euro
catalog number:YT-99452
Availability:
EAN code:5906083134708
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:63,00 kg
By purchasing this product, you will receive 8331 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Portable Spot Air Conditioner 5500 W — YATO YT-99452
A portable spot air conditioner with a monobloc design, intended for cooling rooms of 18–33 m². The unit houses all components of the refrigeration circuit in a single casing, which eliminates the need for permanent installation and allows it to be moved around as required. It operates in three modes: cooling, dehumidifying and fan, with R290 refrigerant and energy class A.
Key features
Monobloc design
All components of the refrigeration circuit — compressor, condenser and evaporator — are housed in a single casing. No external condensing unit or refrigerant connections are required. 360° castors with brakes allow the 55 kg unit to be moved freely.
R290 refrigerant
Propane (R290) is a natural refrigerant with a very low global warming potential (GWP = 3). It is used in class A appliances as a replacement for synthetic refrigerants. The charge is 350 g, and the system operates at a maximum suction pressure of 1.0 MPa and a discharge pressure of 2.5 MPa.
High airflow
An airflow of 900 m³/h means the air in a room of the recommended size can be changed several times per hour. Two-stage fan speed control (L/H) allows the cooling intensity to be adjusted to current conditions.
Air exhaust system
The unit is fitted with two separate ducts: a cold air duct (Ø 120 mm, up to 3 m) and a hot air duct (Ø 190 mm, up to 3 m). Separating the two airflows increases cooling efficiency compared with single-duct systems. The hot air must be discharged outside the room.
Condensate drainage system
The air conditioner has no conventional water tank — condensate is drained through a Ø 11 mm hose, 1 m long. The frequency of emptying depends on the air humidity: at 80% relative humidity every 3–4 hours, at 60% every 7–8 hours.
Timer and controls
The LED panel allows the temperature to be set within the range of 16–32°C and operation to be pre-programmed up to 24 hours in advance (in 0.5 h steps from 1–10 h, in 1 h steps from 11–24 h). Compressor overheating and overload protection safeguards the refrigeration circuit during prolonged operation.
Technical specification
| Model | YT-99452 |
| Manufacturer | YATO |
| Cooling capacity | 5500 W |
| Rated power | 2000 W (max. 2500 W) |
| Power supply | 220–240 V / 50 Hz |
| Rated current | 9 A (max. 11 A) |
| Airflow | 900 m³/h |
| Recommended room size | 18–33 m² |
| Refrigerant | R290 (propane), 350 g |
| Max. suction pressure | 1.0 MPa |
| Max. discharge pressure | 2.5 MPa |
| Operating modes | Cooling, dehumidifying, fan |
| Temperature setting range | 16–32°C |
| Ambient temperature (operating) | 18–45°C |
| Fan speed | 2 speeds (L / H) |
| Timer | 1–24 h (0.5 h steps from 1–10 h; 1 h steps from 11–24 h) |
| Cold air duct | Ø 120 mm × 350 mm, up to 3 m long |
| Hot air duct | Ø 190 mm × 450 mm, up to 3 m long |
| Condensate drain hose | Ø 11 mm × 1 m |
| Air filter | Polypropylene (PP) |
| Energy class | A |
| Power cable | 1.5 m |
| Dimensions (W × D × H) | 490 × 490 × 1062 mm |
| Net weight | 55 kg |
| Mobility | 360° castors with brakes |
Applications
- Cooling offices and conference rooms up to 33 m²
- Cooling residential rooms — bedrooms, sitting rooms, living rooms
- Spot cooling of workstations in production halls (free of dust and chemical substances)
- Temporary cooling of server rooms and telecommunications nodes
- Dehumidifying rooms after flooding or during periods of high humidity
- Ventilating rooms without the need for active cooling
- Seasonal cooling in locations where installing a split air conditioner is impossible or not permitted
Installation requirements and limitations
The unit requires the hot air to be discharged outside using the supplied Ø 190 mm duct — without this, effective cooling cannot be achieved. The air conditioner is not designed for use in dusty, chemically aggressive or potentially explosive atmospheres. The R290 (propane) refrigerant is flammable — the unit must be operated in accordance with the manufacturer's instructions, away from sources of ignition and sparks.
Operation and maintenance
The PP air filter must be cleaned regularly to maintain the stated airflow of 900 m³/h — a clogged filter reduces cooling performance and increases power consumption. The cleaning frequency depends on operating conditions and the air quality in the room.
Condensate is drained by gravity through a Ø 11 mm hose — free flow of the condensate into a suitable container or drain must be ensured. At 80% relative humidity, emptying is required every 3–4 hours; at 60% humidity, every 7–8 hours. Failure to drain the condensate may cause the unit to shut down automatically.
Before the cooling season, it is worth checking the condition of the flexible ducts and the tightness of the connections. Store the unit upright, in a dry place, with the air outlets protected.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Portable Monoblock Air Conditioner 3500 W, 680 m³/h, R290 YT-99451 YATO