SDS Plus Premium Drill Bit 5mm/110mm YT-41930 YATO
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:YT-41930
Availability:
EAN code:5906083036880
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,05 kg
By purchasing this product, you will receive 12 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (1)
SDS Plus Premium Drill Bit 5mm/110mm YT-41930 YATO
A hammer drill bit with an SDS Plus shank, designed for drilling into concrete, reinforced concrete and other building materials. Fitted with a 4-edge tungsten carbide tip and deep flutes for debris removal.
Technical features of the SDS Plus drill bit
SDS Plus shank system
The standard shank used in rotary hammers up to the 5 kg class. It allows quick, keyless bit changes and provides a secure fit that eliminates side run-out during hammer drilling. Compatible with most hobby and semi-professional grade rotary hammers.
4-edge tungsten carbide tip
The head is fitted with four tungsten carbide cutting edges. The additional side edges allow rebar in reinforced concrete to be cut through without interrupting work. Automatic brazing of the carbide increases the strength of the bond at the high temperatures generated during drilling.
Ground flute surface
The grinding process reduces friction between the bit and the material, which means less heat build-up and a longer tool life. The nominal diameter is maintained even after intensive use, making it easier to fit wall plugs and chemical anchors.
Deep extraction flutes
The four flutes in the cutting head efficiently carry dust and debris out of the hole. Effective removal of debris prevents the bit from jamming and speeds up drilling, particularly at greater depths.
Technical specification
| Model | YT-41930 |
| Manufacturer | YATO |
| Shank type | SDS Plus (SDS+) |
| Working diameter | 5 mm |
| Overall length | 110 mm |
| Shank material | High-carbon steel |
| Tip material | Tungsten carbide |
| Number of cutting edges | 4 edges |
| Flute type | Deep, 4-flute |
| Surface finish | Ground |
Applications of the 5 mm SDS Plus drill bit
- Drilling fixing holes in structural concrete of class C20/25 - C50/60
- Preparing fixing points in reinforced concrete with rebar
- Fitting 5-6 mm wall plugs in load-bearing walls
- Installing chemical anchors in concrete substrates
- Drilling into solid brick, concrete blocks and aerated concrete blocks
- Installation work when fitting electrical and plumbing systems
- Preparing holes for skirting boards and mounting profiles
- Drilling into natural and artificial stone with a hardness of up to 7 on the Mohs scale
Tool compatibility
Tool requirements
The drill bit requires a rotary hammer or hammer drill with an SDS Plus chuck. Recommended tool power: minimum 500-650 W for a 5 mm diameter. Optimum speed: 800-1200 rpm with a hammer action of 4000-5000 blows per minute. Do not use in standard drills without a hammer action.
Checking compatibility
The SDS Plus shank has a diameter of 10 mm and four locking grooves (two open, two closed). To check the chuck type on a rotary hammer, measure the diameter of the tool holder - SDS Plus is 10 mm, SDS Max is 18 mm. Most domestic and semi-professional rotary hammers use the SDS Plus standard.
Use and maintenance
Before starting work, check the condition of the tip and make sure the shank is free from mechanical damage. Insert the bit into the chuck until it clicks into place, then pull it to check it is secure. Water cooling is recommended during prolonged drilling.
After use, clean the bit of concrete dust with a wire brush or compressed air. The grooves of the SDS Plus shank should be greased periodically with a special graphite grease, which makes bit changes easier and protects against corrosion. Storing the bit in a dry place prevents oxidation of the steel surface.
Replace the bit when the tip diameter has worn by more than 0.5 mm or when there is visible damage to the tungsten carbide. Blunt cutting edges are indicated by longer drilling times and increased heat build-up in the tool.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Ad...ik,date of purchase 15-05-2021 08:41
