VOREL 61580 Hi-Tec Screwdriver Set, 8 Pieces
Key information
Availability:Întrebați despre disponibilitate
Shipping cost:From 3.29 Euro
catalog number:61580
Availability:
EAN code:5906083615801
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,92 kg
By purchasing this product, you will receive 52 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (2)
VOREL 61580 hi-tec screwdriver set - 8 pieces
A set of eight workshop screwdrivers made from chrome vanadium CrV steel, comprising four flat-head and four Phillips screwdrivers in the most commonly used sizes. The magnetised, sand-blasted tips ensure a secure hold on fasteners during assembly and disassembly.
Technical characteristics of the VOREL 61580 screwdrivers
Chrome vanadium CrV steel
An alloy with increased hardness and resistance to mechanical wear. The addition of vanadium increases torsional strength, which prevents the shaft from deforming when working with tightly driven screws. Chromium provides corrosion resistance.
Magnetised sand-blasted tips
The sand-blasting process increases the surface roughness of the tip, which improves grip in the screw slot. Magnetisation allows screws to be held on the tip when working in confined spaces or overhead.
Satin surface finish
The matt satin coating protects against atmospheric corrosion and makes the tool easier to identify in a toolbox. A satin finish is more resistant to scratching than bright chrome plating.
Plastic handles
Ergonomic grips made of a synthetic material provide basic electrical insulation (these are not VDE-certified screwdrivers for live working) and comfort during prolonged use. The material is resistant to workshop oils and solvents.
Technical specification of the set
| Manufacturer | VOREL |
| Model | 61580 |
| Number of pieces | 8 pcs |
| Shaft material | Chrome vanadium CrV steel |
| Handle material | Plastic |
| Tip finish | Satin, sand-blasted, magnetised |
| Flat screwdrivers | 3.2 × 75 mm, 5 × 75 mm, 6 × 100 mm, 6 × 150 mm |
| Phillips screwdrivers | PH0 × 75 mm, PH1 × 75 mm, PH2 × 100 mm, PH2 × 150 mm |
| Cross-head profile type | Phillips (PH) |
Flat screwdriver markings
The first number (e.g. 3.2 or 5) specifies the tip width in millimetres. The second number (75, 100, 150) is the working shaft length in millimetres. The tip width should match the width of the slot in the screw – a tip that is too narrow will damage the slot, while one that is too wide will not fit into the recess.
Phillips cross-head screwdriver markings
The digit after the PH designation (0, 1, 2) specifies the tip size. PH0 is the smallest size, used in electronics and precision engineering. PH1 is a universal size for screws with a diameter of 2–3 mm. PH2 is the most common size for screws with a diameter of 3–5 mm in construction and automotive work.
Applications of the workshop screwdrivers
- Assembly and disassembly of chipboard and MDF furniture
- Electrical installation work (sockets, switches, trunking)
- Repair of domestic appliances and consumer electronics
- Servicing of motor vehicles
- Fitting of building hardware (hinges, handles, ironmongery)
- Joinery and finishing work
- Servicing of mechanical and pneumatic equipment
- Maintenance of workshop machinery and tools
Use and maintenance
Before starting work, check that the tip size matches the dimensions of the slot in the screw. A mismatch leads to damage of both the tip and the head of the fastener. When tightening, apply pressure along the axis of the screwdriver – working at an angle causes the tip to slip out.
Screwdrivers are not intended for use as chisels, punches or levers. Using a hammer to strike the handle may cause it to crack. After use, clean the screwdrivers of dirt and store them in a dry place. The tips can be degreased periodically and lightly oiled to prevent corrosion.
Worn tips (rounded or chipped) should be withdrawn from use. Attempts to recondition them by grinding alter the tip geometry and lead to further damage to screws. The set contains the basic sizes, covering around 80% of typical workshop and domestic applications.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: To...ak,date of purchase 04-11-2019 18:46
Client: Pa...ko,date of purchase 03-09-2018 02:16
45-Piece Screwdriver, Pliers and Bit Set KD10893 KRAFT&DELE
VOREL 64657 Ratchet Screwdriver with Interchangeable Bits, 46-Piece Set