YATO Rechargeable Head Torch 600lm with Motion Sensor, USB-C
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.28 Euro
catalog number:YT-085941
Availability:
EAN code:5906083112010
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,19 kg
By purchasing this product, you will receive 91 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (1)
YATO YT-085941 Head Torch 600 lm with Motion Sensor and USB-C
An LED head torch with a 1200 mAh lithium-polymer battery, fitted with a motion sensor for touch-free switching. USB-C charging, IP65 water resistance and beam angle adjustment of up to 80 degrees.
Technical features
Touch-free motion sensor
The built-in sensor lets you switch the torch on and off with a hand movement, without touching any buttons. A useful function when working in gloves or with dirty hands, or whenever you need quick access to light without fumbling for switches.
5W POWER LED – 600 lumens
The 5W light source produces a light output of 600 lm, which is bright enough to illuminate a working area at a distance of up to 87.5 metres. The LED delivers cool white light with a long service life.
1200 mAh Li-Po battery with USB-C charging
The lithium-polymer battery with a capacity of 1200 mAh and a voltage of 3.7V provides up to 8 hours of runtime in energy-saving mode. Charging via the USB-C port allows powering from power banks, car chargers and computers.
IP65 water resistance
The IP65 protection rating means complete protection against dust and resistance to water jets from any direction. The torch can be used in rain and snow and in dusty conditions without risk of damage to the electronics.
80° beam angle adjustment
The adjustment mechanism allows you to set the beam angle within a range of 80 degrees, so you can direct the beam downwards when working close to the ground or upwards when on the move. The adjustment holds the set position without slipping on its own.
Four operating modes
The torch offers four lighting modes: 100% power (maximum brightness), 50% power (standard mode), 30% power (energy saving) and flashing mode (signalling). Switching is done with the button on the housing.
Technical specification
| Model | YT-085941 |
| Light source | 5W POWER LED |
| Light output | 600 lm |
| Beam range | Up to 87.5 m |
| Battery | Li-Po 1200 mAh, 3.7V |
| Charging | USB Type-C |
| Runtime | Up to 8 hours (depending on mode) |
| Operating modes | 4 (100%, 50%, 30%, flashing) |
| Motion sensor | Yes |
| Angle adjustment | 80° |
| Protection rating | IP65 |
| Manufacturer | YATO |
Applications
- Workshop and service work in low light
- Running and evening and night training
- Climbing, trekking and hillwalking
- DIY in hard-to-reach places (under a car, in fitted units)
- Camping, survival and outdoor activities
- Walking the dog after dark
- Cycling as additional safety lighting
- Construction and installation work in rooms without power
Use and maintenance
Charging the battery
Before first use, fully charge the battery via the USB-C port. A full charge takes approximately 3-4 hours. The LED indicator on the housing shows the charging status. The Li-Po battery does not need to be fully discharged before charging.
Adjusting the headband
The headband is fitted with silicone strips that prevent it from slipping during movement. The length is adjusted with a buckle. The headband can be hand-washed in lukewarm water with a mild detergent.
Using the motion sensor
The motion sensor is activated by moving your hand within 5-10 cm of the front panel of the torch. The function works regardless of the selected lighting mode. If you do not need the sensor, the torch can be switched off with the standard button.
Maintenance after use in harsh conditions
After working in rain or snow, or in dusty conditions, wipe the housing with a dry cloth. The USB-C port must be dry before connecting the charging cable. Do not immerse the torch in water, despite the IP65 rating.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Pi...yn,date of purchase 23-11-2025 19:08
Keltin K02003 Head Torch with Rotating Head, COB LED 3W + XPE, 800mAh, IP20
YATO YT-08592 Rechargeable LED Head Torch with Motion Sensor