YATO YT-85551 Right-Hand Lawn Tractor Blade
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-861947
Availability:
EAN code:5906083121777
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,88 kg
By purchasing this product, you will receive 120 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
YATO YT-85551 Right-Hand Lawn Tractor Blade YT-861947
Genuine cutting blade designed for fitting to the right-hand side of the YATO YT-85551 lawn tractor. A replacement part for the cutting system, made from iron and measuring 565 × 85 × 35 mm.
Features of the lawn tractor cutting blade
Iron construction
The material provides resistance to impact and deformation when the blade comes into contact with harder objects in the grass. The iron blade withstands the mechanical loads that occur when mowing large lawn areas.
Dimensions 565 × 85 × 35 mm
The 565 mm length determines the cutting radius and the width of the area covered in a single pass. The 35 mm thickness contributes to the rigidity of the blade and prevents it from bending under load during operation.
Right-hand fitting
The specified fitting side means that the blade works with the right-hand spindle of the cutting system. Using the correct blade on each side ensures even distribution of forces and the correct direction of grass discharge.
Compatibility with the YT-85551
The blade is designed for a specific tractor model, which guarantees that the mounting holes, the thickness of the fixing and the blade geometry match the parameters of the cutting deck. Using a dedicated part eliminates problems with incorrect fitting.
Technical specification
| Product model | YT-861947 |
| Application | YATO YT-85551 lawn tractor |
| Fitting side | Right |
| Length | 565 mm |
| Width | 85 mm |
| Thickness | 35 mm |
| Material | Iron |
| Product type | Genuine replacement part |
Applications of the lawn tractor blade
- Replacing a worn blade on the YATO YT-85551 lawn tractor
- Mowing lawns larger than 1,000 m²
- Maintaining domestic and recreational grounds
- Seasonal servicing of the tractor's cutting system
- Restoring the cutting deck to working order after blade damage
- Regular servicing of groundcare machinery
Checking compatibility
Before purchase, check the tractor model and the fitting side of the blade. Two-blade tractors require separate blades for the left and right sides. The model number YT-85551 can be found on the machine's rating plate, usually located on the frame or under the operator's seat.
Use and maintenance of the cutting blade
Fitting the blade
Before replacing the blade, disconnect the battery and place the tractor on level ground. The blade is secured to the spindle with a central bolt and spacer washers, in accordance with the tractor's instruction manual. The tightening torque of the mounting bolt should match the values specified by the manufacturer, typically in the range of 40-60 Nm.
Checking the condition
The blade requires regular inspection before the mowing season. The condition of the cutting edge, the presence of cracks in the material and the degree of blade balance should all be checked. Uneven wear or mechanical damage can cause vibration and accelerated wear of the spindle bearings.
Sharpening and balancing
The blade becomes blunt after approximately 25-30 hours of operation under standard conditions. Sharpening is carried out at an angle of 30-45 degrees, maintaining the original edge profile. After sharpening, the blade must be balanced on a dedicated device or on the mounting shaft to prevent vibration during operation.
Safety during replacement
All work on cutting blades should be carried out wearing protective gloves. Before removing the blade, make sure the engine is switched off, the key has been removed from the ignition and the spark plug lead has been disconnected. When fitting a new blade, check that all fasteners are tightened in accordance with the manufacturer's recommendations.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Solid Smooth Wheel 4.00-4 for G71049 GEKO Bale Wrapper
Clutch Cover for 2400W Electric Chainsaw CG82008-86 GEKO
Drive Shaft Tube for GEKO CG81057-4B 4-in-1 Multi-Function Petrol Brushcutter
Drive Shaft for 4-in-1 Multifunction Petrol Brushcutter CG81057-4A GEKO