50L Booster Pump Set JS100 GEKO G81514
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 7.99 Euro
catalog number:G81514
Availability:
EAN code:5901477139499
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:16,05 kg
By purchasing this product, you will receive 865 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (1)
50L Booster Pump Set JS100 GEKO G81514
A complete set for automatic pressurised water supply, comprising a 1100 W self-priming centrifugal pump and a 50-litre diaphragm pressure vessel. Designed for use with clean water in household plumbing, irrigation systems and water abstraction from boreholes and tanks.
Technical characteristics
Self-priming function
The pump can draw water from a depth of up to 9 metres without the need to prime the system first. This allows it to be installed above the water level, which simplifies installation at dug wells, tanks and ponds.
50L pressure vessel
The diaphragm divides the vessel into a water chamber and an air chamber, providing a pressure buffer. This reduces the number of pump starts at low water draw-off, extending motor life and improving comfort of use.
Copper-wound motor
Copper wire windings offer better electrical conductivity than aluminium, which translates into higher energy efficiency and less heat build-up during operation. The induction motor runs reliably at 3450 rpm.
Stainless steel body
The parts in contact with water are made of stainless steel, which prevents corrosion and extends the service life of the unit. This material is resistant to the mineral deposits found in well water.
Technical specification
| Model | G81514 |
| Motor power | 1100 W |
| Vessel capacity | 50 litres |
| Maximum flow rate | 60 L/min (3600 L/h) |
| Maximum operating pressure | 8 bar |
| Maximum suction depth | 9 m |
| Maximum delivery distance | 45 m |
| Speed | 3450 rpm |
| Port size (inlet/outlet) | 1" / 1" |
| Hose connection type | Thin 30 |
| Maximum water temperature | +40°C |
| Maximum ambient temperature | +40°C |
| Pump body material | Stainless steel |
| Motor housing material | Aluminium |
| Motor winding | Copper wire |
| Cooling type | External fan cooling |
| Protection rating | IP44 |
| Insulation class | B |
Applications
- Supplying household plumbing from a private water source
- Automatic watering of gardens and lawns
- Irrigation of orchards and agricultural crops
- Drawing water from dug or borehole wells up to 9 m deep
- Supplying sanitary installations in recreational buildings
- Filling tanks and swimming pools
- Drawing water from ponds and storage tanks
- Boosting pressure in water supply systems
Operating parameters and limitations
Water quality requirements
The pump is designed for clean water free from mechanical impurities only. It must not be used to pump water containing sand, silt or other solid particles, which can damage the impeller and seals. For well water, fitting a pre-filter is recommended.
Operating temperature
The maximum temperature of the pumped liquid is +40°C. Exceeding this value can damage the seals and cause premature wear of pump components. The unit should be installed in areas where the ambient temperature does not exceed +40°C.
IP44 protection rating
The IP44 rating indicates that the unit is protected against the ingress of solid objects larger than 1 mm in diameter and against water splashing from any direction. The pump can be operated in damp rooms, but must not be exposed to a direct jet of water or flooding.
Installation and start-up
Before first start-up, fill the pump body and the suction hose with water. The self-priming pump has to be primed before it can start working. The suction hose must be airtight and fitted with a non-return valve at the bottom to prevent water flowing back when the pump is switched off.
Install the unit on a stable surface in a horizontal position. Keep a clearance of at least 30 cm from walls to ensure adequate circulation of the air cooling the motor. The water connections must be properly sealed and the installation protected against freezing in winter.
Check the pressure in the pressure vessel before start-up and adjust it to suit the installation. It is normally around 1.5 bar, but may need adjusting depending on the delivery head and the length of the pipework.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Wi...ki,date of purchase 02-03-2026 09:46
Electric Water Booster Pump 50L 1200W 3600L/h KD5232 KRAFT&DELE