Angled Sanding Block 125x90x25mm P180 G78566 GEKO
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:G78566
Availability:
EAN code:5901477182167
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,05 kg
By purchasing this product, you will receive 9 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Angled Sanding Block 125x90x25mm P180 GEKO G78566
A hand-held sanding block with an angled shape, designed for precise sanding of wood, metal, composite and plaster surfaces. The angled form provides access to hard-to-reach areas and enables finishing work.
Product Features
P180 Grit – Medium Smoothing
The P180 designation denotes an abrasive grain size of approximately 82 microns. This grit is used to smooth surfaces after sanding with a coarser grain and to prepare the substrate for lacquering or painting. It removes fine scratches and imperfections, leaving a smooth surface.
Angled Block Shape
The angled form allows work at an angle, which makes it easier to sand corners, edges and hard-to-reach areas. The inclined surface improves control over pressure and allows precise guidance of the tool during finishing work.
Versatile Applications
The block's design allows sanding of various materials – from solid wood and veneers, through plasters and gypsum fillers, to metal surfaces and composites. This versatility removes the need for separate tools for different substrates.
Dimensions 125x90x25 mm
The size of the block strikes a balance between working surface and manoeuvrability. The dimensions allow efficient sanding of larger surfaces while maintaining precision on details. The 25 mm thickness provides adequate rigidity during use.
Technical Specification
| Manufacturer | GEKO |
| Model | G78566 |
| Dimensions (L x W x H) | 125 x 90 x 25 mm |
| Grit | P180 (approximately 82 μm) |
| Shape | Angled |
| Tool type | Hand sanding block |
| Application | Wood, metal, composites, plaster |
Applications
- Smoothing wood surfaces before lacquering or oiling
- Sanding edges and corners of furniture and joinery
- Removing minor imperfections from plasters and gypsum fillers
- Preparing metal surfaces for painting
- Matting and finishing lacquered surfaces
- Removing residual glue and fillers from wood surfaces
- Sanding composite and plastic components
- Renovation work on furniture and decorative elements
Use and Maintenance
How to Use
The block is a hand tool – sanding is carried out with a back-and-forth motion along the wood grain or in a single direction on other surfaces. The angled shape is used when working in corners and on edges, positioning the block at the appropriate angle. Apply even pressure and check the condition of the abrasive surface regularly.
Maintenance
After finishing work, clean the block of dust by tapping it or using a brush. Contaminated abrasive grains lose their effectiveness – if the block becomes greasy, a degreaser can be used. Store in a dry place, away from moisture. A worn abrasive surface should be replaced with a new block.
Choosing the Grit for the Stage of Work
P180 grit is an intermediate or finishing stage in the sanding process. Before using P180, coarser grits (P80-P120) are usually used to remove larger imperfections. After P180, you can move on to P240-P320 grits to achieve a very smooth surface for clear lacquers or satin finishes.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
