Chasing Chisel 26mm SDS Max 300mm YT-47331 YATO
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.28 Euro
catalog number:YT-47331
Availability:
EAN code:5906083062278
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,57 kg
By purchasing this product, you will receive 19 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
SDS Max Chasing Chisel 26mm 300mm YT-47331 YATO
An impact tool designed for chasing grooves in concrete, reinforced concrete, calcium silicate and brick. It is compatible with rotary hammers fitted with an SDS Max shank.
Technical characteristics of the YATO chasing chisel
Working width 26 mm
The chase width is matched to standard electrical and plumbing installations. It allows cables and pipes to be run in single chases without the need for additional widening.
SDS Max shank
A mounting system used on heavy rotary hammers above 5 kg. It ensures a secure seat in the chuck, eliminates play and transfers the full impact force to the cutting edge. Shank diameter 18 mm.
Hardened steel
The material has been subjected to a special heat-hardening process, which increases resistance to abrasion and mechanical deformation when working in hard building materials.
300 mm length
The overall dimension of the tool allows chases to be cut to a standard installation depth with allowance for the finishing plaster. The working length once fitted in the chuck is approximately 240-250 mm.
Technical specification
| Brand | YATO |
| Model | YT-47331 |
| Working width | 26 mm |
| Overall length | 300 mm |
| Shank type | SDS Max |
| Shank diameter | 18 mm (SDS Max standard) |
| Material | Hardened steel |
| Application | Concrete, reinforced concrete, calcium silicate, brick |
Applications of the SDS Max chasing chisel
- Chasing grooves for electrical installations in concrete and reinforced concrete walls
- Cutting channels for cables in walls made of hollow blocks and calcium silicate blocks
- Preparing chases for plumbing pipes in brickwork
- Installation work in industrial buildings and public buildings
- Cutting grooves in hard concrete floors
- Cutting installation chases when upgrading services in old buildings
- Preparing cable runs in reinforced concrete structures
- Construction work requiring accurately routed concealed services
Tool compatibility
The chasing chisel is compatible only with rotary hammers fitted with an SDS Max shank. It does not fit hammers with an SDS Plus shank (a smaller standard with a 10 mm shank diameter). Before purchasing, check the shank type on your tool.
Use and maintenance
Before starting work, make sure that the chasing chisel is correctly seated in the hammer chuck – a distinctive click confirms that it is locked. When chasing, it is recommended to guide the tool at an angle of around 30-45 degrees to the surface, which helps the material to break away and reduces the risk of jamming.
After use, clean the chasing chisel of dust and material residue. The shank should be greased periodically with graphite grease, which makes fitting and removal easier and protects against corrosion. The cutting edge can be restored by sharpening on a grinder, maintaining the original angle of the cutting edges.
Safety precautions
Chasing grooves in concrete and brick produces a large amount of silica dust that is harmful to the respiratory system. A FFP2 or FFP3 dust mask and safety goggles are mandatory. Ear defenders are also recommended due to the high noise level generated by the rotary hammer.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
