Chasing chisel 35mm SDS Max YT-47330 YATO
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:YT-47330
Availability:
EAN code:5906083062261
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,88 kg
By purchasing this product, you will receive 53 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Chasing chisel 35mm SDS Max YT-47330 YATO
SDS Max chasing chisel with a diameter of 35 mm, designed for cutting chases in concrete, reinforced concrete and brick using rotary hammers. Made from hardened steel, the tool is designed for installation and construction work requiring precise chasing in hard materials.
Technical characteristics of the SDS Max chasing chisel
SDS Max shank - compatibility with rotary hammers
The SDS Max mounting system allows quick fitting in higher-power rotary hammers. A shank with a larger diameter than standard SDS Plus transfers higher torque and impact forces, which translates into more efficient chasing in high-strength materials. Before buying, check whether your hammer has an SDS Max shank rather than SDS Plus.
35 mm diameter - optimum chase width
The 35 mm working diameter allows a chase wide enough for most electrical and plumbing installations. This width accommodates standard flush-mounted back boxes and cable bundles while minimising disruption to the wall structure. For narrower chases, smaller-diameter chasing chisels are available.
380 mm length - reach and working stability
The overall length of 380 mm provides adequate reach while maintaining control of the tool. The working length allows chases deep enough for typical concealed installations. A design of this length reduces the risk of the tool overheating during intensive work.
Hardened steel - wear resistance
The steel hardening process increases the hardness of the chasing chisel's working surface, extending the time the cutting edges stay sharp. Hardened steel reduces wear when working in abrasive materials such as concrete with quartz aggregate or reinforced concrete. A special heat treatment minimises the risk of the tool cracking under impact.
Technical specification
| Manufacturer | YATO |
| Model | YT-47330 |
| Shank type | SDS Max |
| Working diameter | 35 mm |
| Overall length | 380 mm |
| Material | Hardened steel |
| Application | Concrete, reinforced concrete, brick, calcium silicate |
Applications of the 35 mm chasing chisel
- Cutting chases for electrical installations in concrete and masonry walls
- Preparing grooves for pipework in plant rooms
- Chasing for flush-mounted back boxes in load-bearing walls
- Creating service channels in concrete floors
- Renovation work involving the upgrading of services in older buildings
- Chasing in solid brick and calcium silicate blocks
- Chasing in reinforced concrete while keeping a safe distance from the reinforcement
- Preparing grooves for power cables in industrial facilities
Tool compatibility
The chasing chisel requires a rotary hammer with an SDS Max shank. It is not compatible with SDS Plus hammers due to differences in diameter and mounting system. Check the shank marking in your hammer's operating instructions before buying. SDS Max hammers are more powerful (above 5 kg) and are designed for heavier demolition and drilling work.
Use and maintenance
Before starting work, check that the chasing chisel is correctly seated in the SDS Max shank by trying to pull the tool out without pressing the release ring. When chasing, work in hammer mode with rotation, avoiding excessive pressure, which can cause the tool to overheat.
Materials such as reinforced concrete require particular care due to the presence of steel reinforcement. Contact with reinforcing bars can damage the chasing chisel's cutting edges. In such cases, it is advisable to locate the reinforcement beforehand with a metal detector and adjust the chase route accordingly.
After finishing work, clean the chasing chisel of concrete dust and material residue. Regularly cleaning the SDS Max shank grooves prevents the build-up of dirt that could make fitting difficult. Storing in a dry place protects the steel from corrosion. If the cutting edges become noticeably blunt, the tool should be replaced with a new one.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
