COB LED Work Light 10W+5W with Power Bank, Magnet and Charging Dock IP54 G15119 GEKO
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:G15119
Availability:
EAN code:5901477191749
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,40 kg
By purchasing this product, you will receive 161 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (3)
COB LED Work Light 10W + 5W with Power Bank and Charging Dock G15119
A multifunctional work light with dual light sources, a built-in 2000 mAh battery and a magnetic swivel base. Supplied with a charging dock and a power bank function for charging mobile devices.
Key features
Dual lighting system
The main 10W COB LED light (550 lm) provides wide, even illumination of the work surface. The 5W LED top spot light (250 lm) emits a focused beam for precision tasks. Both light sources operate independently, so the type of lighting can be matched to the nature of the work.
Articulated magnetic base
The hinged, extendable design allows the light to be rotated and its tilt angle adjusted. The built-in strong neodymium magnet ensures secure mounting on steel surfaces (chassis components, tool benches, frames). An additional magnet on the back of the housing and a rotating hook provide further mounting options in the workspace.
Power bank function
The 18650 lithium-ion battery with a capacity of 2000 mAh allows smart phones and other devices to be charged in an emergency via the USB Type-C port. A charging voltage of 4.2V and a discharge voltage of 3V ensure safe operation of the cell. A 5-LED indicator shows the current battery charge level.
Four operating modes
Spot light, main COB light, red light and flashing red. The main COB light features stepless brightness adjustment, allowing the light intensity to be precisely matched to the conditions and the nature of the work. The red modes are used for signalling in emergency situations.
Technical specification
| Model | G15119 |
| Housing material | PC + TPR + ABS + aluminium |
| Dimensions | 198 × 63 × 29 mm |
| Battery type | Lithium-ion 18650, 3.7V |
| Battery capacity | 2000 mAh |
| Charging port | USB Type-C |
| Charging time | approx. 2.5 hours |
| Charging voltage | 4.2V |
| Discharge voltage | 3V |
| Main light source | COB LED 10W, 550 lm |
| Spot light | LED 5W, 250 lm |
| Runtime (spot light) | 3.5 hours |
| Runtime (main light) | 2.5 hours |
| Ingress protection rating | IP54 (dust and splash protection) |
| Certifications | CE, ROHS |
| Supplied with | Charging dock, USB Type-C cable |
Applications
- Service work in automotive workshops – magnetic mounting on chassis and body components
- Diagnostics and repairs in hard-to-reach places – adjustable beam angle and compact dimensions
- Assembly and installation work – spot light for precision tasks
- Emergency lighting during power cuts – long battery runtime
- Signalling in emergency situations – flashing red light mode
- Outdoor work in damp conditions – the IP54 rating provides splash resistance
- Lighting for tents and caravans – mounting hook and battery power
- Emergency charging of mobile devices on site – power bank function
IP54 rating
The first digit (5) indicates protection against dust – small amounts of dust may enter the housing but do not affect operation of the device. The second digit (4) indicates protection against water splashes from any direction. The light is suitable for workshop and outdoor use, but it is not waterproof – do not immerse it or expose it to a strong jet of water.
Use and maintenance
Fully charge the battery before first use (approx. 2.5 hours). The charging dock allows the light to be docked conveniently without having to connect a cable each time. The LED indicator shows the charging process and the battery charge level.
For secure magnetic mounting, the surface must be steel, clean and dry. The magnet works through thin layers of paint, but its holding force decreases as the coating thickness increases. On aluminium, copper or plastic surfaces, use the mounting hook.
The tilt angle is adjusted by rotating the hinge in the base. The design allows smooth adjustment and holds the chosen position under the weight of the light itself. When using the light hanging, make sure the hook is properly engaged.
After working in dusty or damp conditions, wipe the housing with a dry cloth. Do not use solvents or aggressive cleaning agents, which may damage the plastic components.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Za...ki,date of purchase 03-08-2026 10:28
Client: Kr...ek,date of purchase 24-05-2026 08:14
Client: Ad...cz,date of purchase 30-04-2026 09:15
Under-bonnet rechargeable LED inspection light 107 cm YT-08529 Yato
GEKO G15124 LED COB 5W + 3W Work Light with Power Bank, Magnet and Dimming IP44