Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:KD1762
Availability:
EAN code:5901638118356
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:3,38 kg
By purchasing this product, you will receive 182 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
The KD1762 is a cordless chainsaw from the X-Series line, fitted with a brushless motor. A 306 mm bar and a maximum cutting depth of 280 mm allow efficient work on firewood, branches and structural timber. The tool runs on interchangeable 18V Li-Ion batteries from the X-Series system.
Brushless motors have no carbon brushes to wear out mechanically. This translates into a longer tool life, higher working loads and a run time per charge around 40% longer than with brushed motors. The motor generates less heat, which matters during longer working sessions.
Lithium-ion technology stores around twice as much energy per unit of weight as NiMH batteries. The absence of a memory effect means the battery can be charged at any time without first being fully discharged — the rated capacity remains constant throughout the life of the cells.
The body is made from aluminium and plastics, with the grip surfaces coated in HIGH GRIP rubber. The aluminium provides rigidity and heat dissipation, while the rubber finish improves grip in variable conditions — with wet gloves or when working in low temperatures.
The X-Series 18V Li-Ion batteries (KD1759 with 2000 mAh and KD1760 with 4000 mAh) are compatible with all tools in this range. A single charger handles both capacity variants, which reduces the number of peripheral items needed in the workshop.
| Brand | KRAFT&DELE |
| Model | KD1762 |
| Series | X-Series |
| Tool type | Cordless chainsaw |
| Battery voltage | 18V |
| Compatible batteries | KD1759 (2000 mAh), KD1760 (4000 mAh) |
| Bar length | 306 mm |
| Maximum cutting depth | 280 mm |
| Chain speed | 1.5 m/s |
| Oil tank capacity | 60 ml |
| Weight (without battery) | 3.38 kg |
The KD1762 saw works exclusively with X-Series 18V batteries: KD1759 (2000 mAh) and KD1760 (4000 mAh). Before purchase, check that your battery is marked KD1759 or KD1760 — batteries from other series or other manufacturers are not compatible. The 4000 mAh battery extends the run time per charge but slightly increases the weight of the set.
The 60 ml oil tank should be topped up regularly — lubricating the chain and bar has a direct effect on the durability of both parts and on cutting quality. Check the chain tension before every working session: a chain that is too loose may come off the bar, while one that is too tight accelerates wear. When work is finished, wipe the bar and chain free of residual oil and sawdust, which prevents corrosion during storage.
Store the Li-Ion battery at 10–25°C, away from sources of moisture. Prolonged storage at full charge or completely discharged shortens cell life — the optimal charge level for storage is around 40–60% of capacity.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.