Diamond Blade, Continuous Rim, 180 x 25.4 mm YT-6016 YATO
Key information
Availability:Dostępny u producenta — wysyłka w 3 dni
Shipping time:3 days
Shipping cost:From 3.28 Euro
catalog number:YT-6016
Availability:
EAN code:5906083960161
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,41 kg
By purchasing this product, you will receive 32 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
YATO YT-6016 Diamond Blade - 180 x 25.4 mm, Continuous Rim
Diamond blade with a continuous rim designed for wet cutting of ceramic materials, porcelain stoneware and glazed tiles. The 180 mm diameter makes it compatible with standard angle grinders.
Technical characteristics of the diamond blade
Continuous rim
Having no slots in the rim delivers a smooth, chip-free cut edge, which is essential for finishing work on ceramic tiles and glass. It eliminates the risk of the material cracking during cutting.
5.3 mm segment height
The thickness of the diamond layer determines the service life of the blade. A 5.3 mm segment allows around 40-60 linear metres of ceramic tiles to be cut before the working layer wears out, depending on the hardness of the material.
2.2 mm blade thickness
A thinner blade reduces drag during cutting and the amount of material removed, which translates into less load on the grinder motor and a faster working pace. Optimal for materials of medium hardness.
Wet cutting
Water cooling during cutting lowers the blade temperature by 200-300°C, which extends the life of the diamond segment and prevents the material from overheating. It reduces dust by 95% compared with dry cutting.
Technical specification
| Model | YT-6016 |
| Brand | YATO |
| Blade diameter | 180 mm |
| Mounting bore diameter | 25.4 mm |
| Diamond segment height | 5.3 mm |
| Blade thickness | 2.2 mm |
| Rim type | Continuous (no slots) |
| Recommended maximum speed | approx. 8000 rpm |
| Cutting method | Wet cutting |
Tool compatibility
The 25.4 mm (1 inch) bore diameter is the standard used in 1200-2400 W angle grinders and electric tile saws. Before fitting the blade, check the tool's maximum speed - it must not exceed 8000 rpm for safe operation.
Applications of the diamond blade
- Cutting wall and floor ceramic tiles
- Cutting porcelain stoneware up to 12 mm thick
- Cutting glazed tiles and terracotta
- Cutting stone tiles (marble, granite) of low hardness
- Cutting architectural and decorative glass
- Cutting technical porcelain
- Finishing cuts in bathrooms and kitchens
- Installation work when laying ceramic tiling
Use and maintenance
Before starting work, the blade must be fitted to a bench tile saw or an angle grinder with a water feed. The water jet should be directed straight at the point where the blade meets the material.
Recommended speeds for different materials: ceramic tiles 6000-8000 rpm, porcelain stoneware 5000-7000 rpm, glass 4000-6000 rpm. Lower speeds increase the precision of cuts on delicate materials.
Checking blade wear
The blade needs replacing when the segment height drops below 2 mm or when the cutting time increases noticeably by more than 50%. Using a worn blade causes the material to overheat and increases the risk of cracking.
After finishing work, clean the blade of water and mineral deposits. Storing it in a dry place prevents corrosion of the steel body and extends the life of the tool.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
