Electronic Water Pump with Filter 850W YT-85371 YATO
Key information
Availability:Dostępny od ręki
Shipping time:immediately
Shipping cost:From 3.52 Euro
catalog number:YT-85371
Availability:
EAN code:5906083106637
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:8,00 kg
By purchasing this product, you will receive 828 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Electronic Water Pump with Filter 850W YT-85371 YATO
An electronic water pump with an 850W motor designed for pumping clean water in garden irrigation systems, domestic installations and supplying water outlets from wells and tanks. The unit is fitted with a pre-filter, dry-run protection and three electronically controlled operating modes.
Features of the YATO electronic water pump
Electronic pump control
The pump is fitted with an electronic controller with an LCD display that lets you choose between three modes: automatic (starts when a tap is opened), timer (programmable 24-hour cycle) and continuous. The automatic control removes the need for manual operation and maintains constant pressure in the system.
Flow rate of 3600 l/h at 3.8 bar
The pump delivers up to 60 litres of water per minute at a maximum pressure of 3.8 bar, which is enough to supply 2-3 outlets at the same time or a garden sprinkler system. A delivery head of 38 metres allows it to serve multi-storey installations.
Dry-run protection
A built-in sensor automatically switches the pump off when there is no water at the source, protecting the motor from overheating and mechanical damage. This function is important when pumping from a well with a varying water level or from rainwater tanks.
Pre-filter with easy access
The pump has a removable mechanical filter that traps debris before it enters the pump. Cleaning the filter regularly (every 2-4 weeks with intensive use) prevents a drop in performance and extends the life of the impeller.
Technical specification
| Model | YT-85371 |
| Brand | YATO |
| Motor power | 850 W |
| Maximum flow rate | 3600 l/h (60 l/min) |
| Maximum discharge pressure | 3.8 bar |
| Maximum delivery head | 38 m |
| Maximum suction depth | 8 m |
| Power supply voltage | 230 V AC, 50 Hz |
| Water connection diameter | G1" (1 inch) |
| Maximum water temperature | 35°C |
| Display type | LCD |
| Operating modes | Automatic, timer (24h), continuous |
| Pressure gauge | Yes |
| Automatic start/stop | Yes |
| Housing material | PVC |
| Protection rating | IPX4 (splash protection) |
| Electrical insulation class | I |
| Sound pressure level | 60.89 ± 3.0 dB(A) |
| Sound power level | 72.01 ± 3.0 dB(A) |
| Power cable length | 1.2 m |
| Weight | 8.9 kg |
| Application | Pumping clean water for garden and domestic use |
Applications of the 850W water pump
- Irrigating gardens, lawns and crops using sprinklers or drip systems
- Supplying water outlets in detached houses from a private well
- Pumping water from rainwater tanks for utility purposes
- Water installations in holiday homes, garden gazebos and outbuildings
- Supplying pressure washing systems (provided the relevant parameters are met)
- Portable water supply systems on allotments and campsites
- Topping up garden pools from a well or tank
- Emergency supply during interruptions to mains water
Important information about suction depth
The maximum suction depth of 8 metres refers to the vertical distance between the water level and the pump, not the length of the hose. Where the well is deeper, a submersible pump is required. The actual suction depth is reduced by hydraulic losses in the pipe (around 1 metre for every 10 metres of horizontal run).
Use and maintenance
Before first use, fill the pump housing with water through the filler opening (priming procedure) to remove air from the system. Install the pump on a stable, level surface using the rubber anti-vibration feet. The suction connection requires a reinforced hose that will not collapse under suction.
The pressure gauge allows you to monitor the pressure in the system on an ongoing basis – the operating value should remain within the range of 2.5-3.5 bar. A drop in pressure may indicate a blocked filter, a leak in the suction pipes or worn seals. The LCD display shows the current operating mode and any faults.
The pre-filter needs to be checked every 2-4 weeks – more often when drawing water from open tanks. To clean it, unscrew the filter housing, rinse the element under running water and refit it with the seal. Before the winter season, disconnect the pump, drain the water through the drain plug and store it in a room with a temperature above 0°C.
The unit is designed solely for pumping clean water at a temperature of up to 35°C. It must not be used for liquids containing sand, silt, sewage, chemicals or fuels. The IPX4 protection rating allows it to operate in damp conditions, but the pump must not be submerged in water.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
1300W Electronic Booster Pump with Filter YT-85372 YATO