Flap Disc 115mm P80 GEKO G00302
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:G00302
Availability:
EAN code:5901477102080
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,06 kg
By purchasing this product, you will receive 41 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Flap Disc 115mm P80 GEKO G00302
Flap disc for 115 mm angle grinders, designed for working metals, wood and plastics. Made from aluminium oxide with a P80 grit, it delivers efficient sanding and material removal while maintaining the durability of the abrasive grain.
Key features
P80 grit – medium sanding
A P80 grade to FEPA standard corresponds to a grain size of approximately 201 µm. It provides a balance between material removal rate and surface finish. Used for initial sanding before finishing and for removing rust, paint and coatings.
Aluminium oxide as the abrasive material
Aluminium oxide (Al₂O₃) has a Mohs hardness of 9 and good resistance to brittle fracture. During use the grains self-sharpen by fracturing into sharper edges, which extends the life of the disc and maintains a consistent sanding performance.
Flap construction
Overlapping abrasive flaps bonded to a fibreglass backing provide flexibility during use. This structure reduces vibration, minimises heat build-up in the material and allows irregular shapes and edges to be worked.
Versatile application
Suitable for ferrous metals (carbon steel, cast iron), stainless steel, non-ferrous metals (aluminium) and mixed materials such as wood and plastics. No need to change discs when moving between different materials within a single project.
Technical specification
| Model | G00302 |
| Disc diameter | 115 mm (4.5") |
| Grit | P80 (201 µm) |
| Abrasive material | Aluminium oxide (Al₂O₃) |
| Bore diameter | 22.23 mm (standard) |
| Compatibility | 115 mm angle grinders |
| Materials worked | Metal, iron, stainless steel, cast iron, aluminium, wood, plastic |
Applications
- Removing rust, mill scale and old paint coatings from steel components
- Initial sanding of welded joints before finishing with a finer grit
- Chamfering and levelling sharp edges after cutting metal
- Cleaning metal surfaces before painting or welding
- Removing burrs and unevenness after machining
- Sanding wooden components during restoration and preparation
- Preparing aluminium surfaces for further processing
- Levelling unevenness on plastic surfaces
Checking compatibility
Before fitting, check the bore diameter of the mounting hole on the grinder (22.23 mm as standard) and the maximum permitted disc diameter stated in the tool's manual. Make sure the rotational speed of the grinder does not exceed the maximum peripheral speed of the disc (typically 80 m/s for 115 mm discs).
Use and maintenance
While working, keep the angle of the grinder relative to the surface between 15 and 30 degrees. Do not apply excessive pressure – the weight of the tool is sufficient for effective sanding. Excessive pressure shortens the life of the disc and causes the material to overheat.
Use a rotational speed suited to the material: higher speeds for steel, lower speeds for aluminium and plastics. When sanding non-ferrous metals (aluminium, copper), regularly clean clogged particles of material from the disc.
Store the disc in a dry place, away from sources of moisture. Moisture weakens the bond holding the abrasive grains together and shortens the life of the disc. Check the condition of the disc before use – cracks or mechanical damage rule it out for further use on safety grounds.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
