Flap Wheel with Shank 80x40x6 P60 G78766 GEKO
Najważniejsze informacje
Dostępność:Dostępny od ręki
Czas wysyłki:immediately
Koszt wysyłki:od 3.29 Euro
Numer katalogowy:G78766
Stan magazynowy:
Kod EAN:5901477181757
Stan produktu:New, originally packaged
Gwarancja:24 months of consumer protection
Waga:0,14 kg
Kupując ten produkt otrzymasz od nas 14 punktów które będziesz mógł wykorzystać na zakupy w naszym sklepie. Dotyczy to tylko Klientów zarejestrowanych w naszym sklepie.
- Opis produktu
- Opinie produktu (0)
Flap Wheel with Shank 80x40x6 mm P60 GEKO G78766
Cylindrical flap wheel with a shank, featuring a flap arrangement of abrasive material, designed for mounting in drills and die grinders. The flap construction allows work on components with complex geometry, including curves, holes and internal surfaces.
Technical characteristics
Flap construction
The radial arrangement of the abrasive flaps gives the tool flexibility and allows it to conform to the workpiece surface. This construction increases the contact area with the material and makes it possible to reach hard-to-access areas.
P60 grit
Grit P60 (according to the FEPA standard) corresponds to a grain size of approximately 250 μm. It is used for medium-grade sanding – removing machining marks, levelling surfaces and preparing them for further finishing. It offers a balance between material removal rate and the quality of the resulting surface.
6 mm shank
The 6 mm shank diameter is a standard compatible with the keyless chucks of most drills and die grinders. It ensures a secure hold and minimises vibration during work at high speeds.
Synthetic bond
Synthetic resin as a bond is resistant to the temperature generated during grinding and provides a durable bond between the abrasive grains. It allows dry working without the risk of the wheel structure coming apart.
Technical specification
| Model | G78766 |
| Wheel diameter | 80 mm |
| Wheel height | 40 mm |
| Shank diameter | 6 mm |
| Grit | P60 |
| Maximum speed | 9550 rpm |
| Bond type | Synthetic resin |
| Construction type | Radial flap |
Applications
- Grinding internal surfaces of pipes and sleeves
- Working on round and cylindrical components
- Removing corrosion from hard-to-reach areas
- Finishing welds in corners and recesses
- Preparing surfaces for painting or coating
- Removing burrs after machining
- Sanding wood in areas with complex geometry
- Working on non-ferrous metals and non-alloy steel
Use and maintenance
Selecting the speed
Do not exceed the maximum speed of 9550 rpm. For soft materials (aluminium, wood), use lower speeds (4000-6000 rpm); for steel, use medium speeds (6000-8000 rpm). Excessive speed can cause overheating of the material and clogging of the wheel.
Working technique
Guide the tool evenly without applying excessive pressure – the weight of the grinder itself is usually sufficient. Too much pressure shortens the life of the wheel and reduces the quality of the grinding. When working on metals, use longitudinal or circular movements, avoiding prolonged grinding in a single spot.
Tool compatibility
Check that the drill or grinder has a 6 mm chuck to take the shank and that it reaches the required speed. Hammer drills must be switched to rotary drilling mode without hammer action. Angle grinders require an adaptor for a cylindrical shank.
Informacje handlowe
Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.
Napisz recenzję do tego produktu, a otrzymasz od nas 100 punktów które będziesz mógł wykorzystać na zakupy w naszym sklepie. Dotyczy to tylko Klientów zalogowanych i zarejestrowanych w naszym sklepie.
Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszym sklepie zaloguj się na nie, jeżeli nie załóż bezpłatne konto i napisz recenzję.
