Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:KD1506
Availability:
EAN code:5901638114723
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:3,60 kg
By purchasing this product, you will receive 411 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
The KD1506 is a multi-stage spray unit with a built-in gun, intended for coating surfaces with water-based paints and emulsions. A low working pressure of 0.15 bar limits the dispersal of aerosol into the air, which reduces material consumption and improves working conditions. The unit runs from a standard 230 V mains socket and does not require an external air compressor.
A pressure of 0.15 bar classifies the unit as an HVLP (high-volume, low-pressure) turbine sprayer. Paint is atomised at low pressure, so less material becomes airborne as mist — more of it lands directly on the surface being painted. This means lower paint consumption and less inhalation of aerosol while you work.
The 1.8 mm nozzle diameter allows you to apply emulsion paints, water-based lacquers and primers of typical consistency. Before use, check the viscosity of the paint with the supplied viscosity cup — material that is too thick can block the nozzle or cause uneven application.
An air flow of 180–230 l/min provides a stable working stream during continuous spraying. The fluid output is 450–550 ml/min, which allows relatively large areas to be covered in a short time — useful when painting walls or furniture.
The 1000 ml tank capacity reduces the number of breaks needed to refill material during work. The 150 cm hose gives you freedom of movement without having to move the unit every time you change position, which is particularly practical when painting ceilings or hard-to-reach areas.
The unit comes with a viscosity cup — a simple tool for checking that the paint has the right consistency for spraying. Material that is too thick should be thinned with water (in the case of water-based paints) in line with the paint manufacturer's recommendations. Measuring viscosity before every use reduces the risk of clogging the nozzle and an irregular spray pattern.
| Model | KD1506 |
| Power supply voltage | 230 V |
| Power | 600 W |
| Tank capacity | 1000 ml |
| Working pressure | 0.15 bar |
| Hose length | 150 cm |
| Nozzle diameter | 1.8 mm |
| Fluid output | 450–550 ml/min |
| Air output | 180–230 l/min |
| Additional equipment | Viscosity cup, spray gun |
The unit is designed for use with water-based paints and lacquers at a viscosity suited to the 1.8 mm nozzle. Materials based on organic solvents can damage the plastic parts of the tank and hose — check the paint's technical data sheet before use. If you are unsure about compatibility, the paint or lacquer manufacturer should be able to provide the recommended nozzle diameter and working pressure range.
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.