Petrol Plate Compactor CNP20CNP-20C/87kg/19.8kN GEKO G80202
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 39.73 Euro
catalog number:G80202
Availability:
EAN code:5901477126963
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:98,00 kg
By purchasing this product, you will receive 3650 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (1)
GEKO G80202 CNP-20C Petrol Plate Compactor
Vibratory plate compactor powered by a 6.5 HP Loncin OHV petrol engine, designed for compacting soil and unbound sub-base. The machine works by vibrating a 610 × 460 mm base plate, achieving a compaction depth of up to 30 cm.
Technical features
Centrifugal force 19.8 kN
The parameter that determines compaction efficiency. A value of 19.8 kN allows effective work in sandy, gravelly and mixed soils. A higher centrifugal force means better compaction of sub-base layers and a greater depth of influence.
Loncin OHV 196 cc engine
Single-cylinder, 4-stroke 196 cc petrol engine with overhead valves (OHV). The design ensures stable running under load and lower fuel consumption compared with side-valve engines. A shaft diameter of 19 mm allows standard accessories to be fitted.
Base plate 610 × 460 mm
The 610 × 460 mm working surface strikes a balance between output and manoeuvrability. This size works well on medium-sized areas, on trench work and in locations with limited access.
Travel speed 29 m/min
A working speed of 29 metres per minute allows productive work while keeping the machine under control. Combined with a frequency of 6,500 vibrations per minute, it delivers optimum compaction alongside steady progress.
Technical specification
| Model | GEKO G80202 (CNP-20C) |
| Engine type | Loncin OHV, single-cylinder, 4-stroke |
| Engine displacement | 196 cc |
| Maximum power | 6.5 HP |
| Shaft diameter | 19 mm |
| Base plate dimensions | 610 × 460 mm |
| Centrifugal force | 19.8 kN |
| Vibration frequency | 6,500 vpm |
| Maximum compaction depth | 30 cm |
| Travel speed | 29 m/min |
| Noise emission | 108 dB(A) |
| Weight | 87 kg |
Applications
- Compacting sub-base layers for pavements and driveways
- Preparing the base for block paving and concrete slabs
- Compacting soil in trench and foundation excavations
- Backfilling around service connections and underground utilities
- Compacting sand and gravel bedding
- Levelling and tamping earth surfaces
- Repair and reinstatement work on roads
- Preparing ground for hardstanding areas and car parks
Use and maintenance
Hearing protection
A noise level of 108 dB(A) exceeds the permissible limits for working without hearing protection (85 dB). Hearing protection must be worn by the operator and by anyone in the immediate vicinity of the machine.
Before starting work, check the engine oil and the fuel level. 4-stroke engines require regular oil changes in line with the manufacturer's recommendations – typically after the first 5 hours of operation and then every 25-50 operating hours.
Compaction efficiency depends on the type of soil. The machine gives the best results in sandy and gravelly soils. With cohesive soils (clay, silt), effectiveness may be limited – in that case, repeated passes over the same area are required, or a compactor with a higher centrifugal force.
The maximum compaction depth of 30 cm refers to optimum ground conditions. In practice, compacting in layers 10-15 cm thick is recommended, which ensures even compaction throughout the depth. Thicker layers may be compacted at the surface only, leaving loose material at greater depths.
After finishing work, clean the base plate of any remaining soil and check the condition of the vibration unit mountings. Regular maintenance also includes checking the air filter, the spark plug and the drive belt tension (where fitted).
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Ma...ki,date of purchase 10-04-2026 18:36
Rubber Mat for C90 Plate Compactor 570 × 450mm KD1186 KRAFT&DELE