Spiral Mixing Paddle 80 x 400 mm Hex YT-5494 YATO
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-5494
Availability:
EAN code:5906083954948
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,33 kg
By purchasing this product, you will receive 32 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Spiral Mixing Paddle 80 x 400 mm Hex YT-5494 YATO
A spiral mixing paddle for power drills, designed for the professional mixing of paints, varnishes, mortars and construction adhesives. The galvanised steel construction provides corrosion resistance when working with water-based materials.
Features of the YATO spiral mixing paddle
Spiral mixing geometry
The spiral shape moves the material from the bottom upwards, eliminating sediment at the base of the container. The design prevents lumps and air bubbles from forming in the mix, which results in a consistent material texture.
Corrosion-resistant galvanised steel
Electrogalvanised coating protects the paddle surface against rust when working with water-based materials. The zinc layer extends the service life of the tool even under intensive use on site.
6.35 mm hex shank compatible with drills
The hexagonal hex shank ensures a secure fit in the drill chuck with no slipping when mixing thick materials. The 1/4" format fits standard keyless and keyed chucks on drills and drill drivers.
80 mm diameter for medium-sized containers
The 80 mm size strikes a balance between mixing efficiency and the ability to work in standard 10-20 litre buckets. The 400 mm length allows material to be mixed in deeper containers without the risk of submerging the drill.
Technical specification
| Model | YT-5494 |
| Manufacturer | YATO |
| Paddle diameter | 80 mm |
| Overall length | 400 mm |
| Shank type | Hexagonal (hex) |
| Shank size | 6.35 mm (1/4") |
| Construction material | Galvanised steel |
| Geometry type | Spiral |
| Applications | Paints, varnishes, mortars, adhesives, building materials |
Applications of the spiral mixing paddle
- Mixing emulsion and acrylic paints before painting
- Preparing varnishes and oil-based paints for finishing work
- Mixing medium-density plaster and gypsum mortars
- Preparing dispersion adhesives for tiles and wallpaper
- Mixing filler and levelling compounds
- Preparing primers before painting
- Mixing epoxy and polyurethane resins
- Homogenising liquid insulation materials
Use and maintenance
Selecting operating parameters
For low-viscosity materials (paints, varnishes), a speed of 400-600 rpm is recommended. Thicker materials (mortars, adhesives) require a lower speed of 300-400 rpm to avoid splashing. Start mixing at low speed and gradually increase it once the paddle is submerged.
Cleaning after use
Clean the paddle immediately after finishing work, before the material sets. Wash water-based paints off with water and solvent-based materials with a suitable thinner. Once dry, any remaining material can be removed mechanically with a wire brush or scraper.
Tool compatibility
The 6.35 mm hex shank fits drills and drill drivers with a keyless or keyed chuck. A drill output of at least 500 W is recommended for medium-density materials. When mixing thick mortars, it is worth using drills with a torque control function.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Mixing Paddle for Paint and Mortar PM-04 100x600mm Hex GEKO G00679
Paint and Mortar Mixing Paddle PM-02 100x600mm HEX GEKO G00676