Tvardy T00818 Diamond Blade for Porcelain 230x10x25.4/22.23mm
Key information
Availability:In stock (ready to ship)
Shipping time:immediately
Shipping cost:From 3.29 Euro
catalog number:T00818
Availability:
EAN code:5901477183898
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,35 kg
By purchasing this product, you will receive 132 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Tvardy T00818 230 mm Diamond Blade for Porcelain
Professional diamond blade with a grooved continuous rim, designed for cutting hard ceramic and stone materials. The 10 mm diamond layer ensures durability when working with porcelain, granite and marble.
Technical features
Grooved continuous rim
A continuous grooved profile increases cutting stability and reduces vibration when working with hard ceramic materials. The grooves dissipate heat and dust, extending the life of the blade.
10 mm diamond layer
The diamond layer is 10 mm high and 2.0 mm thick, providing a long working life before it wears out. The diamond concentration enables fast cutting of porcelain and materials of similar hardness.
Universal fitting
The 25.4 mm bore with a 22.23 mm reducing ring allows the blade to be fitted to both bench saws and angle grinders. Check compatibility with your tool before buying.
Dry and wet cutting
The blade's construction allows it to work in both modes. Wet cutting reduces dust and temperature, extending blade life. Dry cutting enables fast work on site where there is no access to water.
Technical specification
| Brand | Tvardy |
| Model | T00818 |
| Blade diameter | 230 mm |
| Bore | 25.4 mm (with a 22.23 mm reducing ring) |
| Blade profile | Continuous, grooved rim |
| Diamond layer height | 10 mm |
| Diamond layer thickness | 2.0 mm |
| Blade thickness | 1.6 mm |
| Maximum speed | 6,600 rpm |
| Operating mode | Dry / wet |
Applications
The T00818 blade is designed for cutting hard ceramic and stone materials. Below is a list of materials with an assessment of performance:
- Porcelain – primary application, precise cutting without chipping
- Ceramic roof tiles – fast, clean cutting
- Granite – cutting possible, wet mode recommended
- Marble – cutting possible, requires care due to the delicacy of the material
- Sandstone – good results when wet cutting
- Quartz – a very hard material, cutting possible with limited efficiency
Note on material compatibility
This blade is not intended for cutting concrete, reinforced concrete, brick, masonry or asphalt. Segmented or turbo blades from the Tvardy range are used for these materials.
Comparison of Tvardy 230 mm blade types
The Tvardy range offers four 230 mm blade profiles. The choice depends on the material being cut:
| Material | Continuous (T00801) | Turbo (T00802, T00813, T00814) | Segmented (T00803, T00810, T00812) | For porcelain (T00804, T00816-819) |
|---|---|---|---|---|
| Porcelain | Excellent | Not recommended | Not recommended | Excellent |
| Concrete | Not recommended | Excellent | Very good | Not recommended |
| Granite | Satisfactory | Very good | Excellent | Satisfactory |
| Roof tiles | Excellent | Not recommended | Satisfactory | Excellent |
| Marble | Satisfactory | Very good | Satisfactory | Satisfactory |
Use and maintenance
Fitting and start-up
Before fitting, make sure the bore diameter matches the tool spindle (25.4 mm, or 22.23 mm with the reducing ring). Check that the maximum speed of the tool does not exceed 6,600 rpm. Tighten the blade in accordance with the tool manufacturer's instructions, using the appropriate spanner.
Cutting technique
When cutting porcelain, wet cutting is recommended – this reduces dust and temperature, preventing chipping of the edges. Guide the blade steadily, without excessive pressure. Too much pressure shortens blade life and can lead to overheating.
Maintenance
After use, clean the blade of dust and material residue. Store it in a dry place, protected from moisture and mechanical damage. Regularly check the condition of the diamond layer – a worn blade loses performance and can cause dangerous vibration.
Safety
Always use personal protective equipment: goggles, gloves and hearing protection. When dry cutting, wear a dust mask. Do not exceed the maximum speed of 6,600 rpm.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
GEKO G78932 Diamond Dry Polishing Pad for Porcelain Stoneware 100mm GR200
Diamond Blade for Chamfering Porcelain Tiles 125x22.23mm M14 G78340 GEKO
Diamond Wet Polishing Pad for Porcelain 125 mm GR1500 G78922 GEKO
Wet Diamond Polishing Pad for Porcelain Tiles 125mm GR50 G78917 GEKO