YATO YT-59145 75mm Wood Carving Disc
Key information
Availability:Available from manufacturer — dispatch in 3 days
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-59145
Availability:
EAN code:5906083122576
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,25 kg
By purchasing this product, you will receive 63 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
YATO 75mm Wood Carving Disc YT-59145
A 75mm wood carving disc designed for shaping wood, aerated concrete and plasterboard. Made from carbon steel with a hardness of 40-50 HRC and a hardened, lacquered surface. Compatible with standard angle grinders with a 22.2mm bore.
Technical features of the 75mm wood carving disc
Carbon steel 40-50 HRC
A hardness of 40-50 HRC (Rockwell C) indicates a medium steel hardness that strikes a balance between wear resistance and flexibility. This material keeps its teeth sharp when working with softwood and building materials, while minimising the risk of cracking under overload.
Hardened and lacquered surface
Hardening increases the surface hardness of the disc, extending the tool's service life. The lacquer coating provides anti-corrosion protection that shields the carbon steel from moisture and oxidation during storage and when working on site.
18 mm disc thickness
The relatively large thickness of the disc in relation to its 75mm diameter gives the tool rigidity and stability during use. This reduces chatter and vibration, resulting in safer operation and more accurate cutting results.
2.4 mm cutting segment
The 2.4mm cutting segment thickness determines the width of the kerf left in the material. This value affects the amount of material removed in a single pass and the load on the grinder's motor. A thicker segment means faster material removal but requires more tool power.
Technical specification
| Model | YT-59145 |
| Outer diameter | 75 mm |
| Mounting bore diameter | 22.2 mm |
| Disc thickness | 18 mm |
| Cutting segment thickness | 2.4 mm |
| Maximum rotational speed | 12,500 rpm |
| Material | Carbon steel |
| Material hardness | 40-50 HRC |
| Surface finish | Hardened and lacquered |
| Application | Wood, aerated concrete, plasterboard |
Applications of the 75mm wood carving disc
- Shaping and profiling wooden components
- Smoothing wood surfaces after cutting
- Removing knots and uneven areas from boards
- Cutting grooves in structural timber
- Shaping and cutting aerated concrete blocks
- Fitting and shaping plasterboard
- Removing old paint coatings from wooden surfaces
- Rapid removal of varnish and paint before renovation
Tool compatibility
The 22.2mm mounting bore is the standard size used on most angle grinders available on the European market. Before fitting, check that the grinder's maximum speed does not exceed 12,500 rpm and that the disc diameter is compatible with the tool's guard.
Safe use
Personal protective equipment must be worn when working with a wood carving disc. Safety goggles protect the eyes from flying fragments and dust. Work gloves protect the hands from vibration and sharp edges. A dust mask or filtering half-mask is essential when working with materials that produce fine dust, especially plasterboard and aerated concrete.
Before starting work, inspect the disc for cracks, chipping or other mechanical damage. A damaged disc may disintegrate when run at high speed. Make sure the disc is correctly fitted and tightened with the grinder's locking nut.
The maximum rotational speed of 12,500 rpm must not be exceeded. Using the disc on a grinder with a higher speed may lead to overheating of the material, loss of mechanical properties or destruction of the tool.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Non-Woven Surface Conditioning Disc for Metal 125 x 22.2 mm G00385A GEKO
Aluminium Hook-and-Loop Backing Pad 100 mm M14 PROFI GEKO G00312