Wood Grinding Disc 125 mm
Key information
Availability:Dostępny u producenta — wysyłka w 3 dni
Shipping time:3 days
Shipping cost:From 3.29 Euro
catalog number:YT-59146
Availability:
EAN code:5906083122583
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,44 kg
By purchasing this product, you will receive 73 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
YATO YT-59146 125 mm Wood Grinding Disc
A grinding disc for angle grinders, designed for working wood, aerated concrete and plasterboard. Made from carbon steel with a hardness of 40-50 HRC and a hardened, lacquered surface.
Grinding disc features
125 mm diameter
A standard size suited to popular 800-1200 W angle grinders. It provides an optimal working surface while maintaining control of the tool when carving and shaping materials.
Speed rating 12,500 rpm
The maximum rotational speed defines the safe working limit of the disc. This value must be higher than the speed of the angle grinder – check the tool's specifications on the rating plate before fitting.
Working thickness 21 mm
The increased disc thickness improves stability during work and allows deeper carving of the material. It adds rigidity to the structure, which translates into precision when shaping wood surfaces.
Carbon steel 40-50 HRC
A hardness of 40-50 HRC on the Rockwell scale means good wear resistance while retaining flexibility. The hardened and lacquered surface protects against corrosion during storage.
Technical specification
| Model | YT-59146 |
| Brand | YATO |
| Outer diameter | 125 mm |
| Mounting bore diameter | 22.2 mm |
| Disc thickness | 21 mm |
| Maximum rotational speed | 12,500 rpm |
| Material | Carbon steel |
| Material hardness | 40-50 HRC |
| Surface finish | Hardened and lacquered |
| Application | Wood, aerated concrete, plasterboard |
Applications of the grinding disc
- Grinding and levelling wood surfaces – removing unevenness, burrs and old finish layers
- Carving and shaping of wooden components – creating recesses, grooves and profiled edges
- Working with soft and hard wood – pine, spruce, oak and beech in joinery work
- Removing excess material from aerated concrete – cutting and fitting building blocks
- Working with plasterboard – forming edges, removing filler and making installation adjustments
- Wood carving work – shaping sculptures and decorative elements
- Surface preparation for further finishing – levelling before painting or lacquering
- Removing old lacquer and paint coatings from wooden components
Use and maintenance
Compatibility with angle grinders
The 22.2 mm mounting bore is standard for 125 mm angle grinders. Before fitting, check the maximum rotational speed of the angle grinder – it must not exceed 12,500 rpm. The specification is given on the rating plate of the tool.
Safety during use
Mandatory personal protective equipment: safety goggles to protect against flying particles, work gloves, and an FFP2 or FFP3 dust mask. The grinding disc generates large quantities of dust – using a dust extraction system or working in a well-ventilated room is recommended.
Storage and maintenance
The disc should be stored in a dry place, protected from moisture. The lacquered surface protects against corrosion, but prolonged contact with water can lead to rust. After use, the disc should be cleaned of dust with compressed air.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
