Chainsaw Chain 15" 3/8" YT-84952 YATO
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:YT-84952
Availability:
EAN code:5906083040269
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,21 kg
By purchasing this product, you will receive 43 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
Chainsaw Chain 15" 3/8" YT-84952 YATO
A saw chain designed for petrol and electric chainsaws. Made from Mn65 manganese steel with a semi-chisel cutter, it is intended for cutting clean and moderately soiled wood.
Technical characteristics of the chain
Mn65 manganese steel
A material with increased tensile strength. It gives the chain a longer service life than standard carbon steels, particularly under intensive use and when cutting harder wood.
Semi-chisel cutter
A cutter profile that delivers a high ratio of cutting speed to ease of sharpening. Suitable for clean and moderately soiled wood, it is less prone to damage than a chisel cutter.
Lubrication system
A link design that distributes oil evenly along the entire length of the guide bar. It reduces friction and heating of the cutting system, extending the service life of both the chain and the guide bar.
25% vibration reduction
A special cutter design minimises the transfer of vibration from the chain to the guide bar. It reduces operator fatigue during prolonged work and improves cutting precision.
Kickback reduction
Designed guide links reduce the risk of dangerous chainsaw kickback on contact with wood. It increases safety at work, particularly when cutting branches and working in awkward positions.
Identification marking "91"
A permanent marking on the links that allows the chain's parameters (3/8" pitch, 0.05" gauge) to be identified quickly without measuring. It makes it easier to select the correct replacement chain.
Technical specification
| Catalogue number | YT-84952 |
| Guide bar length | 15" (38 cm) |
| Number of drive links | 56 |
| Chain pitch | 3/8" (9.53 mm) |
| Guide bar groove width | 0.05" (1.3 mm) |
| Cutter type | Semi-chisel |
| Material | Mn65 manganese steel |
| Application | Clean and moderately soiled wood |
| Chainsaw type | Petrol and electric |
| Compatible guide bar | YATO YT-849321 |
Applications
- Cutting firewood from hardwood and softwood trees
- Pruning branches and clearing trees in the garden
- Forestry work when harvesting timber
- Cutting medium-hard construction timber
- Cutting wood lightly contaminated with sand or soil
- Maintenance work in orchards and parks
- Preparing wood for further processing
How to check whether a chain is compatible with your chainsaw
Before buying, check three key guide bar parameters: length in inches (15"), chain pitch (3/8" – the distance between three consecutive rivets divided by two) and guide bar groove width (1.3 mm). These parameters must match the chainsaw's technical data. The pitch can be measured with a calliper or checked in the chainsaw manual. The guide bar groove width must match the thickness of the chain's drive link.
Use and maintenance
Before first use, soak the chain in chain oil for at least 2 hours. During use, check the chain tension regularly – a correctly tensioned chain should sit snugly against the guide bar but can be pulled away from it by 3–5 mm. A chain that is too loose may jump off the guide bar, while one that is too tight causes excessive wear and overheating.
Check the sharpness of the cutters every 2–3 hours of intensive work. A blunt chain produces fine sawdust instead of chips, requires increased pressure and causes the cutting system to overheat. Sharpen it with a 4.8 mm round file for 3/8" pitch, maintaining a sharpening angle of 30° and a depth gauge height of 0.65 mm.
After finishing work, clean the chain of sawdust and resin and check the condition of the links and cutters. Store it in a dry place, protected from moisture. Check the condition of the rivets joining the links regularly – loose rivets can cause the chain to break during use.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
