Metal Cutting Disc 125x1.0x22.23 mm KD1993 KRAFT&DELE
Key information
Availability:Temporarily out of stock — ask for availability
Shipping cost:From 3.29 Euro
catalog number:KD1993
Availability:
EAN code:5903957009094
Product condition:New, originally packaged
Guarantee:24 months of consumer protection
Weight:0,03 kg
By purchasing this product, you will receive 2 points from us, which you can use for shopping in our store. This applies only to customers registered in our store.
- Product description
- Product reviews (0)
- Purchase history (1)
Metal Cutting Disc 125x1.0x22.23 mm — KD1993
A type 41 cutting disc designed for angle grinders with a 22.23 mm spindle. Made from aluminium oxide abrasive bonded with synthetic resin and reinforced with fibreglass mesh. Sold only in a bulk pack of 25.
Product Features
1.0 mm Thickness — Narrow Cutting Kerf
A 1.0 mm disc removes the minimum amount of material when cutting. This means less material waste, less heat build-up at the cut edge and a cleaner cut compared with 1.6–2.0 mm discs. It performs particularly well on thin-walled profiles and sheet metal, where heat control matters.
Aluminium Oxide Abrasive (A30)
A30 corundum grain (aluminium oxide) is characterised by its hardness and wear resistance, which ensures consistent cutting performance throughout the life of the disc. The A30 designation indicates a medium grain grade — suitable for cutting structural steel, pipes and profiles.
Fibreglass Reinforcement
The disc contains a layer of fibreglass fabric that increases its mechanical strength against bursting during use. This is the standard reinforcement required by EN 12413 for cutting discs operating at high rotational speeds.
Bulk Pack of 25
This product is available only in a bulk pack of 25. A solution designed for workshops, manufacturing companies and installation crews where discs are used regularly. Buying in a bulk pack lowers the cost per disc and reduces how often you need to reorder.
Technical Specification
| Model | KD1993 |
| Outer diameter | 125 mm |
| Bore diameter (spindle) | 22.23 mm |
| Thickness | 1.0 mm |
| Maximum rotational speed | 12,200 RPM |
| Disc type | T41 (flat) |
| Abrasive designation | A30 P.4.B F |
| Abrasive material | Aluminium oxide (corundum) |
| Bond | Synthetic resin |
| Reinforcement | Fibreglass cloth |
| Quantity per pack | 25 pcs |
| Pack weight | 0.7 kg |
How to Check Compatibility with Your Angle Grinder
The disc fits angle grinders with an M14 spindle and a 125 mm (5") disc. Before fitting, make sure the maximum rotational speed of the grinder does not exceed 12,200 RPM — this information is shown on the tool's rating plate or in its technical documentation. The 22.23 mm bore is the standard size used by most manufacturers of 125 mm class angle grinders.
Applications
- Cutting thin and medium-thickness steel sheet
- Cutting steel and stainless steel pipes
- Cutting thin-walled closed and open profiles (channels, angles)
- Assembly and installation work on steel structures
- Working steel rods and sections
- Workshop jobs requiring a precise, clean cut
- Series production of metal components with regular disc consumption
Use and Safety
A type 41 (flat) disc is intended for cutting only — it is not suitable for grinding with the side face. Before each use, check the disc for cracks, chips or other mechanical damage. A damaged disc must be taken out of service.
When working, using the disc guard fitted to the grinder, safety goggles and gloves is recommended. The disc is not intended for cutting non-ferrous metals (aluminium, copper) or concrete — dedicated discs should be used for those applications.
Discs should be stored in a dry place, away from direct exposure to moisture and chemicals, in their original bulk packaging or on a flat surface that prevents warping.
Commercial information
Nobody has written a review for this product yet. Be the first to write a review.
Write a review for this product and you will receive 100 points from us that you can use for shopping in our store. This applies only to customers logged in and registered in our store.
Only registered customers can write product reviews. If you have an account in our store, log in to it, if not, create a free account and write a review.
Client: Er...ka,date of purchase 19-03-2026 18:27
