Disponibilitate:Disponibil
Timpul de livrare:immediately
Cost de expediere:Din 3.29 Euro
număr de catalog:YT-47933
Disponibilitate:
Cod EAN:5906083092510
Stare produs:New, originally packaged
Garanție:24 months of consumer protection
Balanta:0,50 kg
Prin achiziționarea acestui produs, veți primi 72 puncte de la noi, pe care le puteți folosi pentru cumpărături în magazinul nostru. Acest lucru se aplică numai clienților înregistrați în magazinul nostru.
A complete polishing accessory kit with 5 foam pads, a polishing bonnet and an M14 backing pad. Designed for use with angle polishers in bodyshops and car detailing.
The pad size provides an optimum working surface for polishing larger areas of car paint. The 180 mm diameter allows efficient work while maintaining control over the polishing process.
The standard M14 thread ensures compatibility with most angle polishers available on the market. The supplied 8 mm adapter also allows the kit to be fitted to drills with a keyless chuck.
This parameter defines the upper speed limit at which the pads can be used safely. The 6000 rpm limit prevents overheating of the paint and damage to the accessories during intensive work.
The contents include 5 foam polishing pads 25 mm thick, a backing pad (12 mm thick), a mounting adapter and a polishing bonnet. This selection makes it possible to complete a full polishing cycle without having to buy additional accessories.
| Model | YT-47933 |
| Brand | YATO |
| Pad diameter | 180 mm |
| Pad thickness | 25 mm |
| Backing pad thickness | 12 mm |
| Thread size | M14 |
| Maximum speed | 6000 rpm |
| Number of pieces in the kit | 8 pcs |
| Kit contents | 5x foam polishing pad, 1x backing pad, 1x adapter, 1x polishing bonnet |
Before fitting, make sure that the polisher or drill has an M14 thread or an 8 mm keyless chuck. Also check that the tool does not exceed the maximum speed of 6000 rpm - this value is usually given in the tool's specification or on the rating plate.
The pads are attached to the backing pad by pressing them onto the hook-and-loop working surface. Before starting work, check that the pad is evenly attached and does not wobble. A loosely attached pad may come off during use.
After finishing work, clean any remaining polishing compound off the pads under running water and leave them to dry in a well-ventilated place. Wet or damp pads may become deformed and lose their properties. The kit should be stored in a dry place, away from sources of heat.
When polishing, it is advisable to wear safety goggles (protection against splashing compound), a dust mask (to limit inhalation of polishing dust) and work gloves. Work should be carried out in a well-ventilated room.
Nimeni nu a scris încă o recenzie pentru acest produs. Fii primul care scrie o recenzie.
Scrieți o recenzie pentru acest produs și veți primi de la noi 100 puncte pe care le puteți folosi pentru cumpărături în magazinul nostru. Acest lucru se aplică numai clienților autentificați și înregistrați în magazinul nostru.
Doar clienții înregistrați pot scrie recenzii despre produse. Dacă aveți un cont în magazinul nostru, conectați-vă la el, dacă nu, creați un cont gratuit și scrieți o recenzie.
Client: Pi...ba,data cumpararii 02-08-2026 14:25